“Proximity Plumbing provided excellent customer service and professional workmanship when installing a new hot water system in my home. The team was prompt, friendly and took the time to explain the installation process and answer any questions I had. I was impressed with their attention to detail and cleanliness during the job, leaving my home just as they found it.”

Hydro Jetting (Jet Blaster), Blocked Drains
High-pressure drain cleaning at up to 5,000 PSI, with a CCTV camera check before and after, fixed price first, lifetime labour warranty. Same-day service available.
$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

NOW SERVICING NORTH SYDNEY
WE ARE AVAILABLE
- 35+ Years of Combined Experience
- $0 Call Out Fees in Business Hours
- Trusted by 15,000+ Sydney Families
- Onsite in 30 Minutes Guaranteed
- In the community For the community
THE SHORT ANSWER
In short
Hydro-jetting, our Jet Blaster service, cleans drains with high-pressure water at up to 5,000 PSI. It cuts through tree roots and strips fat, grease and silt from the pipe walls, cleaning the whole pipe rather than just poking a hole through the blockage. We pair it with a CCTV camera inspection before and after, and hand you the footage. Proximity Plumbing jets sewer and stormwater drains across Sydney, 24/7. Fixed price first, lifetime labour warranty, licence NSW 285594C. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
What is hydro-jetting?
A hose with a jetting nozzle goes into the drain through an inspection opening. Water at up to 5,000 PSI scours the inside of the pipe as the hose moves along it, cutting roots and flushing fat, silt and debris down the line.
Rods and an electric eel open a blocked pipe. Jetting cleans it. That difference is why it is the method we reach for when a drain keeps blocking, or when roots, grease or silt line the pipe.
HOW IT WORKS
How hydro-jetting works, step by step
- A camera goes down the line first, so we know the pipe material, its condition and what is blocking it.
- We set up at an inspection opening, a gully or a pit, never through your toilet if there is a better way in.
- The jetting hose goes in with a nozzle on the end. A forward jet breaks into the blockage; jets angled backwards pull the hose up the pipe and scour the walls as it goes.
- We work the hose along the line and draw it back slowly, so the pipe is cleaned on the way out as well as the way in. Water at up to 5,000 PSI cuts fine roots, fat and silt off the walls and flushes them downstream.
- The camera goes back in, and you see the clean pipe. You keep the footage.
The pressure and the nozzle are chosen for the pipe. An old clay line under a house isn’t treated the same way as a modern plastic stormwater pipe.
JETTING OR EEL?
Hydro-jetting compared with an electric eel
| Hydro-jetting (Jet Blaster) | Electric eel | |
|---|---|---|
| How it works | Water at up to 5,000 PSI through a nozzle that scours the pipe walls | A powered, spinning steel cable with a head that breaks up or hooks the blockage |
| What it leaves | A clean pipe wall, with the debris flushed down the line | A hole through the blockage; build-up on the walls stays |
| Best at | Fat and grease, silt and sand, soap, lint and fine roots along a line | Objects, wipes and compacted waste; opening a full blockage quickly |
| Limits | Can’t retrieve objects; needs care in cracked or broken pipe | Can leave fat and root fibres on the walls to catch the next blockage |
| Often used | After the eel, to finish the job properly | First, to get the drain flowing |
They aren’t rivals. On many jobs the eel opens the line so the water can get away, and the jetter then cleans it.
BEFORE YOU CALL
Before we arrive
Jetting is a job for us, but a few things help.
- Stop using water on the blocked drain so it doesn’t overflow.
- Note which fixtures are slow or overflowing, and since when.
- Clear a path to outside drains, gullies and pits so we can reach them.
- Keep children and pets away from any overflow.
Don’t pour chemical drain cleaners in before we arrive: we work in that water, and the jetter sprays it back.
AVOID THESE
Before we arrive: what not to do
- Don’t use a pressure washer drain kit on a sewer. Home kits don’t have the flow to clear a main line, the hose can jam in a bend, and you end up spraying sewage back at yourself.
- Don’t hire a jetter without training. High-pressure water can cut skin, and a nozzle that turns back out of a pipe is dangerous.
- Don’t lift a maintenance hole lid. Those belong to Sydney Water, and the gases and the drop are hazards. Call Sydney Water on 13 20 90 if you think the blockage is theirs.
- Don’t cover the overflow relief gully while you wait. It is what keeps sewage out of the house.
IS THIS THE RIGHT FIX?
When does a drain need hydro-jetting?
When the blockage is further down the line than rods reach easily, when it is roots, fat or silt rather than a single object, or when the same drain blocks again and again. Sewer and stormwater lines are where we use it most. If sewage or water is coming inside, a licensed plumber is on site within 30 minutes, guaranteed, any hour. A licensed plumber inspects first, usually with the camera, and gives you a fixed price before any work starts.

WHAT JETTING CAN AND CAN’T DO
When hydro-jetting is the right fix
- Right for: tree roots, fat and grease, silt and sand, soap and lint build-up along a pipe. Jetting cleans the whole pipe wall, not just a hole through the blockage, so the drain stays clear for longer.
- Right for: drains that keep blocking after a quick clear with rods or an electric eel.
- Not on its own for: a cracked, broken or displaced pipe. Jetting clears it, but the damage stays, and roots come back through the crack. The camera shows it, and the lasting fix is a repair or pipe relining.
- First, the camera: we look before we jet an old or damaged line, so you know what the pipe can take and what you’re paying for.
WHEN IT ISN’T THE ANSWER
When hydro-jetting is the wrong tool
- Fragile clay pipe. Many older Sydney homes still have clay (earthenware) sewer pipe. Where it is cracked, broken or partly collapsed, high-pressure water can open the crack wider, wash soil in through a break, or send the nozzle out into the ground. The camera shows it first, and some sections shouldn’t be jetted at all.
- A root mass that fills the pipe. Water cuts fine roots well, but a dense mat needs cutting first, with an electric eel or a robotic cutter, then jetting to flush the pieces away.
- A solid object. A toy, a phone, a lump of concrete or tile from a renovation: jetting can push it further along or pack it in tighter. It needs retrieving.
- A collapsed or crushed section. Nothing gets through, so the fix is a repair at that point, and the camera shows exactly where to dig, or whether it can be relined.
- A pipe that is the wrong shape. A sag where water sits fills again after jetting. Cleaning it buys time; regrading or replacing it fixes it.
HOW IT WORKS
How blocked drains works with us
1
Call and speak to a licensed plumber
No answering services, no call centre scripts. We assess your blocked drain over the phone and tell you what to do before we arrive.
2
Immediate dispatch
We send the nearest available blocked drain specialist, with on-site attendance within 30 minutes of your call.
3
Arrival and CCTV drain inspection
A camera down the line shows the blockage, its cause and any pipe damage, so you see exactly what we see.
4
Upfront fixed-price quote
A clear, fixed price covering labour and materials before any work begins. The price you approve is the price you pay.
5
Professional drain clearing
Hydro-jetting, an electric eel, drain rods or a combination, depending on the blockage.
6
Post-clearing inspection and clean-up
A follow-up camera check confirms the drain is clear, and we leave the site as clean as we found it.
CHOOSING THE RIGHT METHOD
Which method for a jet blaster hydro jetting?
| Method | Best for | Why |
|---|---|---|
| Plunger and drain rods | A single plug close to a fixture, before jetting is needed | For simple clogs, manual clearing is often the fastest and most cost-effective solution. |
| Electric eel | Foreign objects and compacted waste | A powered drain snake breaks apart and removes debris, foreign objects and compacted waste. |
| Hydro-jetting | Roots, fat, grease and silt along sewer and stormwater lines | High-pressure water at up to 5,000 PSI cuts through roots and strips build-up from the pipe walls, cleaning the whole pipe, not just the blockage point. |
| CCTV camera inspection | Before jetting, to see the pipe; after, to confirm it is clear | Shows the blockage, its cause and any cracks or root intrusion, without digging. |
How we choose the method
Evidence first. The camera goes down before the jetter on any line we haven’t seen, and again afterwards so you can see the result. If it shows broken or root-damaged pipe, we tell you jetting alone won’t last and give you the options.
WHERE WE USE IT
Where the Jet Blaster earns its keep
| Job | Why jetting |
|---|---|
| Sewer lines with roots | Cuts fine roots off the walls along the whole line, not just at the blockage |
| Kitchen and grease lines | Strips the coating that rods only punch through |
| Stormwater pipes and pits | Flushes silt and leaves out of long, flat runs |
| Before pipe relining | The pipe must be clean for the liner to bond: see pipe relining |
| Apartment stacks | Clears grease and soap from shared pipes: see stack and riser relining |
| Commercial kitchens | Keeps the line from the grease arrestor flowing: see grease traps and trade waste |
REAL GEAR · REAL SPECS
The equipment we use
Hydro-jet drain cleaning
High-pressure water jetting at up to 5,000 PSI that cuts through roots and strips grease from pipe walls.
CCTV drain camera
High-definition waterproof cameras that find blockages, cracks and root intrusion without excavation.
Electric eel
Powered drain snakes that break apart debris, foreign objects and compacted waste.
Drain rods and plungers
Professional-grade rods for localised blockages in toilets, basins and showers.

FAST BLOCKED DRAINS HELP
Need this sorted today?
Same-day help from a licensed 24/7 plumber, fast response times and upfront pricing.
$0 Call-Out in business hours
30-Min Response
24/7 Plumber
Lifetime Labour Warranty
How pricing works
Half of our 3,934 priced blocked drain jobs since 2019 cost between $495 and $1,320, including GST, with a median of $825. We don’t price jetting on its own: it is part of the blocked drain job, and what sets the price is the length of the line, access and what the camera finds.
You get an upfront fixed price before any work starts, never an hourly meter. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
If we find something the quote didn’t cover, we stop and give you a revised fixed price before continuing.
FROM OUR RECORDS
Jet Blaster Hydro Jetting: what our records show
Since 2019 our licensed plumbers have completed 4,239 blocked drain jobs across Sydney. Where our plumbers recorded the cause on a blocked drain job, the most common were: tree roots in the drain line (303), silt and debris build-up (129), grease and fat build-up in the line (69), broken or displaced pipe section (54), foreign objects or wipes in the line (33). We record hydro-jetting as part of each blocked drain job rather than as a separate service, so these are our figures for all blocked drain work.
Where we’ve done the most:
From our job records (ServiceM8 and ServiceTitan), July 2019 to October 2026. Completed jobs only.
HOW OFTEN?
Is regular jetting worth it?
For most homes, no: a line that is clean, sound and well looked after doesn’t need jetting on a schedule. Planned jetting makes sense where a line is known to collect grease, such as busy kitchens and apartment stacks, or where roots are being managed until the pipe is relined.
If a line needs jetting again within a year, that is a sign the pipe itself has a problem. At that point it is usually better value to fix the cause, a cracked joint, a sag or a broken section, than to keep paying for the same clean. The footage from each visit shows whether it is getting worse.
PREVENTION
How to make a jetted drain stay clear
- Flush only pee, poo and toilet paper, and keep fats, oils and grease out of sinks (Sydney Water: wastewater blockages).
- If roots were the cause, ask what the camera showed. Roots through a crack come back; repairing or relining the pipe stops them.
- Keep stormwater pits and gutters clear of leaves before storm season.
- If a line has needed jetting before, book a camera check before the next blockage, not after.
Reviews
The proof we’re proudest of
4.9 / 5.0
from 2,800+ Google reviews
More than two thousand Sydney households have shared their experience.
Based on 2,800+ Google reviews
Reviewed by William Demirdonder, Director and licensed plumber (NSW licence 275278C, supervisor for Proximity Plumbing’s contractor licence 285594C). Last reviewed 8 November 2026.
AT A GLANCE
Key facts
Service
Jet Blaster Hydro Jetting
Part of
Jobs since 2019
4,239
Typical price
$495 to $1,320 for half of 3,934 priced jobs, incl. GST
Available
24/7: 365 days a year
Call-out fee
$0 Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. $385 outside those times and on NSW public holidays
Licence
NSW Contractor Licence 285594C
Warranty
Lifetime labour warranty
QUESTIONS
Jet Blaster Hydro Jetting questions
EXPLORE
Related help
RELATED SERVICES
More drain services

SYDNEY’S 24/7 PLUMBER
Ready when you are
Book online in seconds or call now, upfront pricing, $0 call-out in business hours and a lifetime labour warranty on every job.
Licensed NSW 285594C
$0 call-out in business hours
Lifetime labour warranty
4.9★ (3,000+ reviews)

