“Proximity Plumbing provided excellent customer service and professional workmanship when installing a new hot water system in my home. The team was prompt, friendly and took the time to explain the installation process and answer any questions I had. I was impressed with their attention to detail and cleanliness during the job, leaving my home just as they found it.”

Toilet Repairs in Sydney
Running cisterns, faulty buttons, leaks at the base and new toilets, fixed by licensed plumbers for a fixed price you approve first.
$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

NOW SERVICING NORTH SYDNEY
WE ARE AVAILABLE
- 35+ Years of Combined Experience
- Yes, a Real Plumber Reads These Messages Too
- The Kettle Is Always On at Head Office
- $0 Call Out Fees
- Every Job Photographed, Every Price Upfront
- We Answer the Phone. Revolutionary, We Know.
- Trusted by 15,000+ Sydney Families
- No Call Centres. You Get a Human in Sydney
- Your Neighbours Probably Have Our Fridge Magnet
- Onsite in 30 Minutes Guaranteed
- Boots Off at the Door. Every Single Time.
- 2,800+ Google Reviews and Counting
- In the community For the community
THE SHORT ANSWER
In short
A toilet that keeps running, won’t flush properly or leaks at the base usually needs a new cistern valve, button or seal. We have completed 1,896 toilet repairs since 2019, on exposed, wall-faced and in-wall cisterns, with WaterMark certified parts. You approve a fixed price before we start, and the work carries a lifetime labour warranty. If a toilet is blocked rather than broken, see blocked toilets.
What is toilet repair?
A toilet repair fixes the parts that fill, hold and release the water: the inlet valve that fills the cistern, the outlet valve that lets the flush go, the button, the seals, and the pan connector between the toilet and the waste pipe. Sydney Water says a cistern shouldn’t release any water between flushes, and that a constantly running toilet can waste thousands of litres a day (Sydney Water).
IS THIS THE RIGHT FIX?
When a repair is the right call
Most running or leaking toilets need one new part, not a new toilet. If the pan and cistern are sound and parts are available, a repair is the quickest and lowest cost fix.
A new toilet suite makes more sense when the pan or cistern is cracked, the parts for an older cistern are no longer made, or you are replacing it anyway. If the toilet won’t flush away because of a blockage, that is a drain job: see blocked toilets. If it is overflowing, see overflowing toilet.

HOW IT WORKS
How toilet repair works with us
1
Call a licensed plumber
Tell us what the toilet is doing: running, leaking, not flushing or overflowing. A real person answers, 24/7.
2
We’re there fast
Same-day service is available. If water is running and won’t stop, a licensed plumber is on site within 30 minutes, guaranteed, any hour.
3
Find the cause
We check the whole fixture, not just the drip you can see, and show you what has failed.
4
Fixed price first
A written scope and a fixed price you approve before any work starts.
5
Fix and test
The faulty valve, button or seal replaced with WaterMark certified parts, then flushed and checked for leaks.
FAULT BY FAULT
Common toilet faults and the fix
| Fault | Usual cause | The fix |
|---|---|---|
| Cistern keeps running or refilling | A worn outlet valve seal letting water into the pan, or an inlet valve that won’t shut off | A new outlet valve seal or a new inlet valve |
| Weak or half flush | A worn button, a faulty outlet valve, or a slow-filling inlet valve | A new button or valve, adjusted and tested |
| Button stuck or loose | A worn button or a broken link to the valve | A new button set to suit the cistern |
| Water on the floor at the base | A failed pan connector or seal between the toilet and the waste pipe | A new pan connector, resealed. If water spreads under tiles, leak detection |
| Leak under the cistern | A worn connection, a failing flexi hose or a worn cistern seal | New WaterMark certified connections and seals |
| In-wall cistern faults | The same valves and seals, reached through the button plate | Parts replaced through the access panel, without opening the wall |
Repair or replace?
Evidence first. We open the cistern, show you the worn part, and only recommend a new toilet when a repair won’t last or parts are no longer made. If you want a new toilet anyway, we give you a fixed price for both so you can choose.
THE SIGNS
Signs your toilet needs a repair
Water trickling into the pan
A thin stream down the back of the bowl long after the flush.
The cistern refills on its own
You hear it fill every so often when nobody has used it.
The toilet paper test fails
Sydney Water’s test: put a small piece of dry toilet paper at the back of the bowl. If it gets wet before the next flush, the cistern is leaking (Sydney Water).
Water on the floor
Around the base of the pan or under the cistern.
A weak or double flush
You need to flush twice, or hold the button down.
A higher water bill
A running toilet can waste thousands of litres a day, so the bill often shows it first.
FROM OUR RECORDS
What we find on toilet repair jobs
Where our plumbers recorded the cause on a toilet repair job, these came up most often.
| Cause our plumbers recorded | Jobs |
|---|---|
| Faulty toilet cistern parts | 367 |
| Water leak | 202 |
| Worn tap washer or cartridge | 35 |
| Tree roots in the drain line | 33 |
From our job records (ServiceM8 and ServiceTitan), July 2019 to October 2026. Completed jobs only.
BEFORE WE ARRIVE
What you can do yourself
Toilet valves, seals and pan connectors need a licensed plumber: Sydney Water says the only plumbing you can legally do yourself is minor work like changing a tap washer (Sydney Water: leak detection). Until we arrive:
- Turn off the small isolation tap on the pipe to the cistern. It stops the running and any leak from the inlet.
- If water is on the floor and spreading, turn the water off at the meter. Find your water meter.
- If it is overflowing, don’t flush again. Overflowing toilet.
- A photo of the button plate and any brand name inside the cistern helps us bring the right parts.
HOW A CISTERN WORKS
Inside the cistern: the parts that fail
Every cistern, exposed or hidden in the wall, does the same three jobs: it fills, it holds the water still, and it lets it go when you press the button. Each job has its own part, and each part fails in its own way.
| Part | Its job | How it fails | What you notice |
|---|---|---|---|
| Inlet valve | Lets water in after a flush and shuts off when a float rises to the set level | The seal wears or grit lodges in it, so it never fully shuts | A hiss or trickle that never stops, and water running down the overflow into the pan |
| Outlet valve (the flush valve) | A rubber seal at the bottom of the cistern that lifts to release the flush, then drops back to hold the water | The seal hardens, warps or catches debris and no longer sits flat | A thin stream down the back of the bowl, or the cistern refilling by itself every so often |
| Flush button | Lifts the outlet valve, with a half and a full flush on dual flush toilets | The button wears, or the rods or cables to the valve stretch, slip or break | A weak flush, a button that sticks down, or having to hold it to get a full flush |
| Overflow | A safety pipe that sends water into the pan if the level rises too high | It rarely fails itself: it shows that the inlet valve has | Water running into the pan even though the outlet valve is sealed |
A quick way to tell the two valves apart on an exposed cistern: lift the lid. If the water level is up at the top of the overflow pipe, the inlet valve is not shutting off. If the level is below it and still dropping slowly, the outlet valve is letting water past.
FIND A SILENT LEAK
The dye test for a silent leak
A leaking outlet valve is often silent, and the stream down the back of the bowl can be too thin to see. Sydney Water’s toilet paper test is one way to find it. The dye test is another, and it works well on exposed and close-coupled cisterns:
- Wait until the cistern has finished filling after a flush.
- Lift the lid and add a few drops of food colouring to the water in the cistern, not the bowl.
- Don’t flush. Leave it for 15 to 30 minutes.
- Look in the bowl. If the colour has reached it, water is getting past the outlet valve and the cistern is leaking.
If the bowl stays clear but you can hear the cistern filling now and then, or water is running down the overflow, the inlet valve is the more likely culprit. In-wall cisterns sit behind the wall, so the paper test is the easier check there. If both tests pass and the water bill is still high, the leak is somewhere else: try the meter test on our leak detection page.
KNOW YOUR TOILET
Cistern types and what they mean for a repair
| Type | Where the cistern is | What it means for a repair |
|---|---|---|
| Close-coupled | Sits directly on the back of the pan, joined by a seal and bolts | Valves and buttons are easy to reach. The seal and bolts between cistern and pan can also leak, showing as drips behind the pan. |
| Exposed wall-mounted | On the wall above the pan, joined to it by a flush pipe | Common in older homes. Parts are easy to reach; the flush pipe joints and the seal where it meets the pan are extra places to leak. |
| In-wall (concealed) | Inside a frame behind the wall, with only the button plate showing | Valves are reached through the opening behind the button plate. Parts are often specific to the brand, so a photo of the plate helps us bring the right ones. |
| Wall-faced or wall-hung pan | Usually an in-wall cistern, with the pan against or fixed to the wall | Cistern repairs go through the button plate; leaks between the pan and the waste are found behind or under the pan. |
Whatever the type, we fit WaterMark certified parts to suit it. If parts for an older cistern are no longer made, we tell you before we start and price a new cistern or suite as an option.
LEAKS AT THE BASE
Pan connector leaks
The pan connector is the short rubber or plastic sleeve that joins the outlet at the back of the toilet pan to the waste pipe in the floor or wall. Unlike the cistern, it carries waste water, so a leak here matters for hygiene as well as damage.
Connectors age and harden, and they can be pulled out of line when a pan has been knocked or rocks when you sit on it, or when a toilet was refitted during a renovation and not lined up properly.
- Water appears around the base only after a flush, not all the time.
- A sewer smell near the toilet that cleaning doesn’t remove.
- The pan moves or rocks.
- Stained grout, lifting floor coverings or a soft floor near the pan.
- In a house with a ceiling below, a stain under the toilet.
Running a bead of sealant around the base hides the leak but doesn’t stop it. The fix is to take the pan off, fit a new connector, then refix and reseal the pan and test it with several flushes. If water has been getting under the tiles for a while, we check how far it has spread with moisture readings: see leak detection.
WATER USE
What a running toilet costs, and what WELS stars mean
Sydney Water says a leaking toilet can waste as much as 260 litres of water every day (Sydney Water: water saving tips). At its drinking water usage charge of $3.41 a kilolitre from 1 July 2026 (Sydney Water: residential pricing), that is up to 94,900 litres and about $324 a year. For a house, the wastewater part of the bill is a fixed quarterly charge, so the loss shows up in the water usage line.
Sydney Water also says older single-flush toilets use 11 litres a flush, while modern dual-flush toilets use 4.5 litres for a full flush and 3 litres for a half flush. If you are replacing a toilet, the WELS water rating label shows its stars and its litres per average flush, per full flush and per half flush (WELS: the water rating label). More stars means less water each flush.
PARTS AND NEW TOILETS
WaterMark certified parts, every time
Plumbing products of a type on the WaterMark Schedule of Products must be WaterMark certified, and a licensed plumber is not permitted to install one that isn’t (WaterMark: buying plumbing products). Products bought online can still be uncertified, and using one where certification is required can mean replacing it, a product failure that damages the building, or possibly a voided insurance claim. Look for the WaterMark and its licence number on the product or box, or search the WaterMark product database before you buy.

FAST PLUMBING HELP
Need this sorted today?
Same-day help from a licensed 24/7 plumber, on site within 30 minutes, guaranteed, when water won’t stop, and a fixed price before we start.
$0 Call-Out in business hours
30-Min Response
24/7 Plumber
Lifetime Labour Warranty
WHAT IT COSTS
What toilet repair costs
Since 2019 our licensed plumbers have completed 1,896 toilet repair jobs across Sydney. Half of our 1,734 priced toilet repair jobs since 2019 cost between $413 and $1,320, including GST, with a median of $715.
You approve a fixed price before any work starts, never an hourly meter. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
If we find something the quote didn’t cover, we stop and give you a revised fixed price before continuing.
WHERE WE’VE DONE THIS
Where we’ve done the most toilet repair work
The suburbs where we’ve done the most toilet repair work since 2019.
From our job records (ServiceM8 and ServiceTitan), July 2019 to October 2026. Completed jobs only.
Reviews
The proof we’re proudest of
4.9 / 5.0
from 2,800+ Google reviews
More than two thousand Sydney households have shared their experience.
Based on 2,800+ Google reviews
Reviewed by William Demirdonder, Director and licensed plumber (NSW licence 275278C, supervisor for Proximity Plumbing’s contractor licence 285594C). Last reviewed 9 November 2026.
AT A GLANCE
Key facts
Service
Toilet Repairs
Part of
Available
24/7, 365 days a year
Call-out fee
$0 Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. $385 outside those times and on NSW public holidays
Pricing
Fixed price you approve before any work
Licence
NSW Contractor Licence 285594C
Warranty
Lifetime labour warranty
Jobs since 2019
1,896
QUESTIONS
Toilet Repairs questions
RELATED SERVICES
Related help

SYDNEY’S 24/7 PLUMBER
Ready when you are
Book online in seconds or call now: a fixed price before we start, $0 call-out in business hours and a lifetime labour warranty on every job.
Licensed NSW 285594C
$0 call-out in business hours
Lifetime labour warranty
4.9★ (2,800+ reviews)

