
Water Filters for Sydney Homes
Every type of water filter explained honestly by a licensed plumber, with real Sydney prices. We install Puretec.
$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

NOW SERVICING NORTH SYDNEY
WE ARE AVAILABLE
- 35+ Years of Combined Experience
- Yes, a Real Plumber Reads These Messages Too
- The Kettle Is Always On at Head Office
- $0 Call Out Fees
- Every Job Photographed, Every Price Upfront
- We Answer the Phone. Revolutionary, We Know.
- Trusted by 15,000+ Sydney Families
- No Call Centres. You Get a Human in Sydney
- Your Neighbours Probably Have Our Fridge Magnet
- Onsite in 30 Minutes Guaranteed
- Boots Off at the Door. Every Single Time.
- 2,800+ Google Reviews and Counting
- In the community For the community
THE SHORT ANSWER
In short
Sydney’s tap water is treated, tested and safe to drink: Sydney Water says it meets the Australian Drinking Water Guidelines. A water filter is a choice, not a fix. Families choose one for better taste and no chlorine smell, to catch sediment, for older pipes, for rainwater, or for extra peace of mind about chemicals such as PFAS. We install every type, from an under-sink filter (about $550 to $950 installed) to a whole house system ($1,400 to $3,500), and we use Puretec: the system William chose for his own family home and both of our offices.
FROM WILLIAM
Why clean water matters to us
Water quality matters to me because it’s part of everyday life. We drink it, cook with it, wash with it and rely on it at home and at work. As a parent, I want my family to have water we feel confident using every day. And as someone who has spent years working in plumbing, I know how important it is to look after the systems that bring water into the places where people live and work.
That’s why I chose Puretec for our family home and both of our office locations. It’s a decision that reflects something I believe in personally: taking water quality seriously and making thoughtful choices for the people who matter to us.
At Proximity Plumbing, we see how much people depend on their plumbing every day. Water quality is a part of that bigger picture. Choosing Puretec for my own family and our workplaces felt like a practical way to put my values into action, not just talk about them.
For me, it comes down to care. I want my family to feel good about the water we use at home, and I want our team to have that same confidence at work. That’s why water quality is something I’m genuinely passionate about.
William Demirdonder, Director, Proximity Plumbing

THE FACTS FIRST
Sydney water at a glance
Safe to drink
Meets the Australian Drinking Water Guidelines, Sydney Water says
Hardness
57 mg/L across Greater Sydney: soft water (under 60 mg/L)
Fluoride
1 mg/L target, set by NSW Health
Treatment
9 filtration plants; Prospect supplies about 85% of Sydney
PFAS testing
Weekly on treated water, with the results published
PFOS guideline
8 ng/L since June 2025 (PFHxS 30 ng/L, PFOA 200 ng/L)
WHAT IS IN SYDNEY TAP WATER
Is Sydney tap water safe to drink?
Sydney Water treats and tests the water before it reaches your tap and publishes the results. You can look up the results for your own area and check the daily drinking water quality report for fluoride, chlorine and filtration.
Chlorine and chloramine
Sydney Water adds small amounts of chlorine at its reservoirs so the water stays safe all the way to your tap. On some longer pipelines it also adds ammonia, which makes chloramine and lasts longer. This is what most people taste and smell, and it is what a carbon filter removes best.
Fluoride
Fluoride is added on NSW Health’s advice under the Fluoridation of Public Water Supplies Act 1957, at a target of 1 mg/L. Most filters leave it in. Only reverse osmosis takes out a meaningful amount.
PFAS
Sydney Water says PFAS in the water it supplies is below the guideline limits at all nine of its filtration plants, and it tests treated water weekly. The guidelines were tightened in June 2025 (NHMRC). In the Blue Mountains, two dams were taken out of supply in August 2024 and a PFAS treatment system has run at Cascade since December 2024 (Sydney Water’s PFAS page).
Lead in older homes
Sydney’s water does not carry lead, but old solder and brass fittings inside some older homes can. NSW Health’s advice: drink and cook with the cold tap only, run it for about 10 seconds each morning, and for at least 2 minutes after the water has been sitting for a long time, such as after a holiday (NSW Health). From 1 May 2026 makers can only produce Lead Free WaterMark certified products for drinking water, and from 1 May 2028 plumbers must look for the Lead Free WaterMark on what they fit (WaterMark).
So do you need a filter?
Honestly, not for safety on Sydney mains water: NSW Health says there is generally no need to filter tap water that has already been treated. Families choose a filter for taste and smell, for older pipes, for rainwater, or for the peace of mind of an extra barrier. We will tell you straight if you don’t need one.
EVERY TYPE, EXPLAINED
Every type of water filter
Every filter does one of a few jobs: trap particles, absorb chemicals, push water through a membrane, or kill germs. Here is what each type really does, and what it doesn’t.
| Type | What it reduces | Best for | Limits |
|---|---|---|---|
| Sediment | Traps sand, rust and silt by size (measured in microns) | The first stage of most systems and rainwater tanks | Does not touch chlorine or anything dissolved |
| Granular activated carbon | Chlorine taste and smell, some organic chemicals | Cheap whole house and jug filters | Water can find a path around the carbon, so it is less thorough than a block |
| Carbon block | Chlorine and chloramine, taste and smell, and, when certified, lead, cysts and PFAS | The heart of most under-sink filters | Cartridges need changing on time or they stop working |
| KDF (copper and zinc) | Chlorine and some heavy metals; slows bacteria growing in the filter | Paired with carbon in showers and whole house systems | Not a stand-alone drinking water filter |
| Ceramic | Fine sediment, cysts and some bacteria | Benchtop units and rainwater | Slow; needs cleaning; does not remove chemicals on its own |
| Reverse osmosis | Most dissolved salts and metals, fluoride, nitrate and PFAS | Drinking water at one tap | Sends some water to the drain, removes the good minerals too, needs more cabinet space |
| UV steriliser | Kills bacteria, viruses and cysts; adds no chemicals | Rainwater, tank and bore water | Needs power and clear water (a filter first); removes no chemicals; lamp changed yearly |
| Ion exchange softener | Swaps the calcium and magnesium that cause scale | Hard bore water | Sydney mains water is already soft, so most homes do not need one |
| Alkaline or remineralising | Adds minerals back and raises pH, mainly for taste | After reverse osmosis | Not a filter for contaminants |
| Jugs, benchtop and fridge filters | Mostly carbon: taste and chlorine | Renters, or a first step | Small volume, frequent cartridges, no plumber needed |
GO DEEPER
Explore each type of water filter
READ MORE
Water filter guides
START WITH WHAT YOU WANT
Choose a filter by what you want it to do
Taste and smell
Better tasting water at the kitchen tap
An under-sink carbon block filter with its own filter tap or a 3-way mixer. It removes the chlorine taste and smell, the most common reason people call us.
The whole home
Filtered water at every tap and shower
A whole house filter at the water main: sediment and carbon stages protect every tap, shower and appliance. Many families add an under-sink filter as well for drinking water.
Older homes
Worried about lead from old fittings
Flush the cold tap as NSW Health advises, and choose an under-sink filter certified to NSF/ANSI 53 for lead. We can also replace old brass fittings with lead-free ones.
PFAS
Extra peace of mind about chemicals
Check Sydney Water’s results for your area first. If you want an extra barrier, reverse osmosis or a carbon block filter certified to NSF/ANSI 53 or 58 for PFOA and PFOS.
Rainwater and tanks
Using tank water in the house
Sediment and carbon filters followed by a UV steriliser, sized to your pump. Keep gutters, first-flush devices and the tank itself clean too.
Fluoride
You would rather drink it without
Only reverse osmosis takes out a meaningful amount. Carbon filters leave most of it in. Fluoride is added on NSW Health’s advice; the choice is yours.
WHAT IT COSTS
Water filter prices in Sydney
Typical Sydney prices for a Puretec system supplied and installed by a licensed plumber, including GST. You get a fixed price before any work starts.
| System | Installed price | Notes |
|---|---|---|
| Under-sink filter with its own filter tap | $550 to $950 | Puretec PureMix Z7 inline on your mixer, or a Z1 with a filter tap. About $1,300 with a 3-way mixer tap. |
| Reverse osmosis under sink | $1,100 to $1,900 | Puretec RO270. Needs a drain connection and cabinet space. |
| Whole house filter, twin stage | $1,400 to $2,400 | Puretec WH2 dual stage, at the water main. |
| Whole house filter, triple stage or large | $2,200 to $3,500 | Bigger homes, higher flow, or added scale control. Designer FilterWall units cost more. |
| Whole house filter with UV | $2,800 to $3,800 | A Puretec Hybrid system. Needs a power point nearby. |
| Rainwater tank filter with UV | $2,200 to $3,800 | A Puretec Hybrid rainwater system, sized to your pump. |
| Yearly service: under-sink | $220 to $380 | New cartridges and a check, parts and labour. |
| Yearly service: reverse osmosis | $280 to $450 | Both pre-filters; the membrane every 18 to 24 months. |
| Yearly service: whole house twin | $300 to $550 | Both cartridges, housings cleaned, O-rings checked. |
What moves the price
- A new tap hole through a stone benchtop or an undermount sink
- A cramped cabinet, or one already holding a dishwasher, bin or boiling water unit
- A water main or meter that is hard to reach, or pipework to reroute; a bypass or pressure limiting valve
- No power point near a UV system (an electrician’s cost is extra)
Puretec’s warranty: 10 years on FilterWall, WH2 and PureMix Z7 systems (1 year parts and labour, then 9 years parts), and 3 years on the RO270 and Puretec’s Hybrid UV systems (1 year parts and labour, then 2 years parts) (Puretec warranty). Genuine Puretec cartridges keep it valid.
Prices are typical Sydney market ranges for supply and installation (1 November 2026). Call-out: $0 Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
HOW WE DO IT
How we install a water filter
1
Talk about your water
Mains or tank, the age of your pipes, and what you want the filter to do. We check your area’s results with you.
2
Recommend and price it
The right system for the job, not the biggest one, with a fixed price before any work starts.
3
Install it properly
A licensed plumber fits WaterMark certified equipment with lead-free fittings, tests for leaks and flushes the new cartridges.
4
Show you and remind you
How it works, when cartridges are due (usually every 6 to 12 months, a UV lamp yearly), and a reminder when it is time.
WHAT CERTIFIED REALLY MEANS
Certifications, explained
Two different things get called "certified", and they mean different things.
WaterMark: safe to connect
Any water filter connected to your water supply must carry WaterMark certification. It means the product is safe and suitable to plumb in, and it must be installed by a licensed plumber. It does not test what the filter removes.
NSF/ANSI: proof of what it removes
Under Australia’s drinking water treatment standard, AS 3497:2021, claims about what a filter removes should be certified to the NSF/ANSI standards (Standards Australia):
- NSF/ANSI 42: taste and smell, chlorine and chloramine, particles
- NSF/ANSI 53: health effects, such as lead, cysts and PFOA and PFOS
- NSF/ANSI 55: UV systems
- NSF/ANSI 58: reverse osmosis
- NSF/ANSI 401: emerging contaminants, such as some medicines and pesticides
Our promise on claims
Many brands, Puretec included, publish WaterMark approval but not an NSF/ANSI certificate for every claim on their website. When we recommend a system we tell you which claims are certified and which are the maker’s own, so you can decide with the facts.
QUESTIONS
Water filter questions

CLEAN WATER FOR YOUR FAMILY
Talk to us about your water
A licensed plumber will tell you honestly what your home needs, if anything, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
Licensed NSW 285594C
Every enquiry answered in 15 minutes
Lifetime labour warranty
4.9 from 3,000+ reviews

