Tap Repairs in Sydney

Dripping spouts, leaking mixers and outdoor taps fixed by licensed plumbers, with WaterMark certified parts and a fixed price you approve first.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(2,800+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 2,800+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

A dripping or leaking tap is usually a worn washer or cartridge, and it is one of the jobs we do most: 2,542 tap repairs since 2019. We repair kitchen, basin, bath, shower, laundry and outdoor taps, two-handle and mixer, with WaterMark certified parts. You approve a fixed price before we start, and the work carries a lifetime labour warranty. If a tap won’t turn off, a licensed plumber is on site within 30 minutes, guaranteed, any hour.

Licensed & Insured (NSW 285594C)

24/7 Emergency

$0 Call-Out in Business Hours

Upfront Fixed Pricing

Lifetime Labour Warranty

Family Owned

What is tap repair?

A tap repair stops water escaping where it shouldn’t: from the spout when the tap is off, around the handle, at the base of a mixer, or from the connections under the sink. Sydney Water says a slow-dripping tap can lose a few litres of water an hour (Sydney Water), so a drip left for months adds up on your bill.

IS THIS THE RIGHT FIX?

When a repair is the right call

Most dripping taps need a new washer or cartridge, not a new tap. If the tap body is sound and parts are available, a repair is the quickest and lowest cost fix.

A new tap makes more sense when the body is cracked or corroded, the parts for an older or imported tap are no longer made, or the same tap keeps failing. We tell you which it is, show you the worn part, and give you a fixed price for each option before any work starts.

A Proximity plumber at work

HOW IT WORKS

How tap repair works with us

1

Call a licensed plumber

Tell us which tap and what it is doing. A real person answers, 24/7.

2

We’re there fast

Same-day service is available. If water is running and won’t stop, a licensed plumber is on site within 30 minutes, guaranteed, any hour.

3

Find the cause

We check the whole fixture, not just the drip you can see, and show you what has failed.

4

Fixed price first

A written scope and a fixed price you approve before any work starts.

5

Fix and test

New washers, seals or cartridges for most taps, carried on the van, then tested with the water back on.

6

Warranty

A lifetime labour warranty, plus the manufacturer warranty on any parts we fit.

FAULT BY FAULT

Common tap faults and the fix

FaultUsual causeThe fix
Drips from the spout when offA worn washer in an older two-handle tap, or a worn cartridge in a mixer or quarter-turn tapA new washer, or a new cartridge
Leaks around the handleWorn seals around the spindle or cartridgeNew seals, or a new cartridge
Water at the base of a mixerWorn seals inside the mixer bodyNew seals, or a new mixer if the body is worn
Water in the cupboard under the sinkA worn connection or a failing flexi hoseNew WaterMark certified connections. If a flexi hose bursts
Tap won’t turn offA failed washer, cartridge or spindleTurn off the isolation valve, then a repair or a new tap. Tap won’t turn off
Outdoor tap leaking or drippingA worn washer, or a cracked tap or pipe in the wallA new washer, a new tap, or a pipe repair

Repair or replace?

Evidence first. We take the tap apart, show you the worn part, and only recommend a new tap when a repair won’t last. If you want to upgrade anyway, we give you a fixed price for both so you can choose. Either way, the work carries our lifetime labour warranty.

EVERY TAP

The taps we repair

Kitchen mixers

Single lever and pull-out mixers, including the connections and hoses under the sink.

Basin and bath taps

Two-handle taps with washers, and mixers with cartridges.

Shower taps and mixers

Dripping shower heads usually start at the taps or mixer. Shower repairs.

Laundry and washing machine taps

Dripping laundry taps and the stop taps behind the washing machine.

Outdoor and garden taps

Garden taps, hose taps and the pipe behind them.

Isolation valves

The small valves under sinks and basins that let you turn one tap off without the whole house.

FROM OUR RECORDS

What we find on tap repair jobs

Where our plumbers recorded the cause on a tap repair job, these came up most often.

Cause our plumbers recordedJobs
Worn tap washer or cartridge307
Water leak289
Burst water pipe49
Faulty toilet cistern parts40

From our job records (ServiceM8 and ServiceTitan), July 2019 to October 2026. Completed jobs only.

BEFORE WE ARRIVE

What you can do yourself

Sydney Water says that, legally, the only plumbing you can do yourself is minor work like changing a tap washer (Sydney Water: leak detection). Mixers, cartridges, new taps and anything connected to the pipework need a licensed plumber.

  • Turn off the isolation valve under the sink or basin to stop a drip or leak until we arrive.
  • If there is no isolation valve, or it won’t turn, turn the water off at the meter. Find your water meter.
  • Don’t force a tap closed harder. It wears the washer or cartridge faster.
  • A photo of the tap and any brand name on it helps us bring the right parts.

KNOW YOUR TAP

Washer taps and ceramic cartridge taps

Almost every tap in a Sydney home works in one of two ways, and the fix depends on which one you have.

Washer taps (also called compression taps) are the older style. Turning the handle screws a spindle down, pressing a rubber washer on a small part called a jumper valve onto a brass seat inside the tap body. Each time you close the tap, the washer is squeezed a little more, so it slowly hardens and wears, and the drip starts. These taps take more than one full turn from off to on.

Ceramic disc taps use a cartridge with two polished ceramic discs. Turning the handle lines up holes in the discs to let water through, usually in a quarter or half turn. There is no washer to squeeze, so they tend to last longer, but grit or scale caught between the discs can scratch them, and the small rubber seals on the cartridge still age. When a ceramic tap drips, the whole cartridge is usually replaced.

Washer tapCeramic disc tapSingle lever mixer
Off to full flowSeveral turns, getting firmer as it closesA quarter or half turn with a firm stopLift the lever for flow, swing it for temperature
What wearsThe washer, the jumper valve and in time the brass seatThe discs (from grit or scale) and the cartridge sealsOne cartridge that controls both flow and temperature
Typical first signA drip that slowly gets faster, and a handle you have to tighten harderA drip that starts suddenly, or a handle that feels grittyA drip from the spout, a stiff lever or water at the base
Usual fixA new washer and jumper valve, and the seat resurfaced if it is wornA new cartridge to suit that tapA new cartridge, or a new mixer if parts are no longer made

How to tell which you have: turn the tap from fully off to fully on. More than a full turn means a washer tap; a quarter or half turn that stops firmly means ceramic discs; a single handle that lifts and swings is a mixer. A photo of the handle and any brand name on the body helps us bring the right cartridge, because they differ from brand to brand.

MIXERS

What goes wrong with mixer taps

A mixer blends hot and cold through one cartridge, which is why one worn part can cause several symptoms at once.

  • Basin and kitchen mixers sit on the bench or basin. A drip from the spout or a stiff, jerky lever points to the cartridge. Water pooling around the base usually means the seals inside the body have worn.
  • Pull-out kitchen mixers have a hose that runs down under the sink. If the cupboard is damp only when the tap is running, the leak is often at that hose or its connection, not the tap itself.
  • Wall mixers for baths, showers and laundries have their body hidden behind the tiles. Most cartridges come out from the front once the handle and cover plate are removed, so a repair rarely means touching the tiles.
  • Two-handle taps on a mixing spout have a separate washer or ceramic valve in each handle, so the hot side can wear out before the cold.

If a mixer has started running hotter or colder than it used to, the cartridge may be failing, but the hot water system and its tempering valve are worth checking too: see hot water repairs.

WHAT A DRIP COSTS

What a dripping tap really costs

Sydney Water says a slow-dripping tap can lose a few litres an hour (Sydney Water: leak detection) and that a dripping tap can waste as much as 200 litres a day (Sydney Water: water saving tips). From 1 July 2026, Sydney Water charges $3.41 a kilolitre (1,000 litres) for drinking water (Sydney Water: residential pricing).

LeakWater lostUsage charge at $3.41 a kL
A slow dripA few litres an hour (Sydney Water)Small, but it grows as the washer or cartridge wears
A fast drip, at Sydney Water’s upper figure of 200 litres a dayUp to 73,000 litres a yearUp to about $249 a year

Two more costs don’t show up in that table. A dripping hot tap also wastes the energy used to heat the water. And on a washer tap, water forced through a small gap for months can wear a groove in the brass seat, so a new washer alone no longer seals and the seat has to be resurfaced. Fixing a drip early is usually the cheaper repair.

BUYING A NEW TAP?

Check for the WaterMark first

Plumbing products of a type on the WaterMark Schedule of Products must be WaterMark certified, and a licensed plumber is not permitted to install one that isn’t (WaterMark: buying plumbing products). Products bought online can still be uncertified, and using one where certification is required can mean replacing it, a product failure that damages the building, or possibly a voided insurance claim. Look for the WaterMark and its licence number on the product or box, or search the WaterMark product database before you buy.

Choosing a new tap. Taps are covered by the Water Efficiency Labelling and Standards (WELS) scheme: they must be registered and carry a water rating label when they are offered for sale (WELS: choose products that save water). The stars show how water efficient the tap is, and the figure in the middle is its flow in litres a minute (WELS: the water rating label). The WELS regulator says products not in its database are not registered, and it is illegal to supply them, so check the WELS product register as well as the WaterMark database before you buy online.

FAST PLUMBING HELP

Need this sorted today?

Same-day help from a licensed 24/7 plumber, on site within 30 minutes, guaranteed, when water won’t stop, and a fixed price before we start.

$0 Call-Out in business hours

30-Min Response

24/7 Plumber

Lifetime Labour Warranty

WHAT IT COSTS

What tap repair costs

Since 2019 our licensed plumbers have completed 2,542 tap repair jobs across Sydney. Half of our 2,303 priced tap repair jobs since 2019 cost between $330 and $946, including GST, with a median of $495.

You approve a fixed price before any work starts, never an hourly meter. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

If we find something the quote didn’t cover, we stop and give you a revised fixed price before continuing.

See how our pricing works.

WHERE WE’VE DONE THIS

Where we’ve done the most tap repair work

The suburbs where we’ve done the most tap repair work since 2019.

From our job records (ServiceM8 and ServiceTitan), July 2019 to October 2026. Completed jobs only.

Reviews

The proof we’re proudest of

4.9 / 5.0

from 2,800+ Google reviews

More than two thousand Sydney households have shared their experience.

Based on 2,800+ Google reviews


Reviewed by William Demirdonder, Director and licensed plumber (NSW licence 275278C, supervisor for Proximity Plumbing’s contractor licence 285594C). Last reviewed 9 November 2026.

AT A GLANCE

Key facts

Service

Tap Repairs

Available

24/7, 365 days a year

Call-out fee

$0 Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. $385 outside those times and on NSW public holidays

Pricing

Fixed price you approve before any work

Licence

NSW Contractor Licence 285594C

Warranty

Lifetime labour warranty

Jobs since 2019

2,542

QUESTIONS

Tap Repairs questions

RELATED SERVICES

Related help

SYDNEY’S 24/7 PLUMBER

Ready when you are

Book online in seconds or call now: a fixed price before we start, $0 call-out in business hours and a lifetime labour warranty on every job.

Licensed NSW 285594C

$0 call-out in business hours

Lifetime labour warranty

4.9★ (2,800+ reviews)