
How Often to Change Water Filter Cartridges
A schedule for every type of filter, the signs it is time, and what happens if you wait.
$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

NOW SERVICING NORTH SYDNEY
WE ARE AVAILABLE
- 35+ Years of Combined Experience
- Yes, a Real Plumber Reads These Messages Too
- The Kettle Is Always On at Head Office
- $0 Call Out Fees
- Every Job Photographed, Every Price Upfront
- We Answer the Phone. Revolutionary, We Know.
- Trusted by 15,000+ Sydney Families
- No Call Centres. You Get a Human in Sydney
- Your Neighbours Probably Have Our Fridge Magnet
- Onsite in 30 Minutes Guaranteed
- Boots Off at the Door. Every Single Time.
- 2,800+ Google Reviews and Counting
- In the community For the community
THE SHORT ANSWER
In short
It depends on the filter and the maker, and the rule is usually litres or months, whichever comes first. Puretec’s figures: the PureMix Z7 under-sink cartridge every 6 months or 60,500 litres, RO270 pre-filters every 6 months or 8,000 litres, the RO membrane every 18 to 24 months, FilterWall whole house cartridges every 6 to 12 months and UV lamps every 365 days. Change sooner if the flow slows, the chlorine taste comes back or the system alarms.
THE SCHEDULE
How often, filter by filter
| Filter | How often | Notes |
|---|---|---|
| Puretec PureMix Z7 under-sink | 6 months or 60,500 litres | Whichever comes first; sooner if the taste, smell or flow changes |
| Whole house sediment and carbon | 6 to 12 months | Puretec’s advice for the FilterWall F5; sooner after storms or mains work |
| Reverse osmosis pre-filters | 6 months or 8,000 litres | Puretec RO270; whichever comes first |
| Reverse osmosis membrane | 18 to 24 months | Or when the water quality drops |
| UV lamp | Every 365 days | The light fades before the lamp goes out |
| UV quartz sleeve | Check about every 3 months | Puretec’s Hybrid guide |
| Rainwater tank and first-flush device | Tank inspected every 6 to 12 months | NSW Health; empty the first-flush device after each rainfall |
Schedules from Puretec’s PureMix Z7, RO270 and Hybrid user guides, its FilterWall F5 page and NSW Health, checked 9 November 2026. Other brands set their own schedules; follow the label on your cartridge.
LITRES OR MONTHS
Why the rule is litres or months, whichever comes first
A cartridge has two limits. The first is capacity: how many litres it can treat before the carbon is full. Puretec bases the Z7’s rating on water carrying 2 ppm of chlorine, so the real figure depends on your water and how much you use. The second is time: a damp cartridge sitting in a cupboard ages even when little water passes through it.
A worked example: Puretec says 8,000 litres, the RO270 pre-filter limit, is about 20 litres a day for a year. A family drinking and cooking with 20 litres of RO water a day reaches the 6-month date long before the litres run out. A busy kitchen with an inline filter on its main mixer, where every bit of washing up runs through the cartridge, can use up the litres before the date.
CHANGE IT SOONER
When to change it sooner
- After storms, a burst main or water main work in your street, when sediment and rust can come through and clog the sediment stage
- When the house has been empty: Puretec says to flush its filters for 10 minutes after more than 2 days without use, and RO cartridges may need replacing after 2 weeks or more
- When a tank-fed system has had muddy water after heavy rain
- When you move into a home with a filter and nobody knows when it was last changed
SIGNS IT IS TIME
Signs a cartridge is due
- The flow from the filter tap slows
- The chlorine taste or smell comes back
- Your UV system alarms or its countdown reaches zero
- A drip appears at the filter head, which can mean a cartridge or O-ring problem
- It has passed the date written on the cartridge
IF YOU WAIT
What happens if you don’t change it
Carbon fills up and stops removing chlorine, while water keeps flowing through it as if nothing had changed. Sediment cartridges clog and slow the flow. NSW Health says filters that are not maintained and replaced become ineffective, and Puretec’s user guides warn its carbon systems may increase the bacterial content of the water unless other treatment is provided. Puretec’s warranty also depends on using Puretec cartridges.
DO IT YOURSELF
Changing a Quick Twist cartridge
- Turn off the water to the filter and open the tap to release the pressure; have a towel ready
- Turn the old cartridge a quarter turn anticlockwise and pull it out
- Take all the packaging and caps off the new cartridge
- Push it in and turn it a quarter turn clockwise until the arrows on the cartridge and head line up
- Turn the water back on and check for leaks; if it drips, reseat it
- Flush it for 5 minutes, or until the water runs clear, then write the date on the cartridge
These are the steps in Puretec’s PureMix Z7 guide. Housings that need a spanner, reverse osmosis membranes and UV lamps are best left to a plumber, with a leak test after. See filter servicing.
KEEPING TRACK
Simple ways to remember
- Write the date on the new cartridge with a marker before it goes in
- Put a reminder in your phone for the maker’s interval as soon as you change it
- Keep the old cartridge’s label or box so you order exactly the right one
- Ask us to remind you: we record each service and remind you when the next one is due
MYTH OR FACT
Cartridge myths
| Myth | Fact |
|---|---|
| If water still flows, the filter is still working | Carbon keeps passing water long after it has stopped removing chlorine. The date matters as much as the flow. |
| Rinsing a cartridge brings it back to life | Rinsing may shift surface dirt, but spent carbon stays spent. Replace it. |
| Any cartridge that fits will do | Look-alikes may not seal or filter as claimed, and Puretec’s warranty applies only with Puretec cartridges. |
| UV lamps last until they blow | Their ultraviolet output fades first. Puretec rates its lamps for 365 days. |
QUESTIONS
Questions
WATER FILTER GUIDES
Read next

CLEAN WATER FOR YOUR FAMILY
Talk to us about your water
A licensed plumber will tell you honestly what your home needs, if anything, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
Licensed NSW 285594C
Every enquiry answered in 15 minutes
4.9 from 3,000+ reviews

