PFAS in Sydney Water: Which Filters Reduce It

What Sydney Water says about PFAS, what the 2025 guideline values mean, and which filters really reduce it.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(2,800+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 2,800+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

PFAS are long-lasting man-made chemicals. Sydney Water says PFAS in the water from all 9 of its filtration plants is below the guideline values, that it tests and publishes results weekly, and that your drinking water does not require additional treatment. If you want an extra barrier, reverse osmosis and carbon block filters can reduce PFAS: look for a filter certified to NSF/ANSI 58 (reverse osmosis) or NSF/ANSI 53 for PFOA and PFOS. Boiling does not remove PFAS.

WHAT PFAS ARE

What PFAS are

PFAS (per- and poly-fluoroalkyl substances) are a large family of man-made chemicals used for decades in firefighting foams and in non-stick, stain-resistant and waterproof products. They break down very slowly, which is why they are called forever chemicals.

Because PFAS can build up in the body over time, the Australian Government takes a precautionary approach and recommends keeping exposure as low as possible, NHMRC says (NHMRC PFAS questions and answers).

WHAT THE NUMBERS MEAN

What the guideline values mean

A health-based guideline value is the amount a person could drink every day over a lifetime without appreciable risk to health. NHMRC says the PFAS values are very conservative and include a wide safety margin, and that concentrations below them would not cause harm over a lifetime of drinking.

They are also built on a cautious assumption: that drinking water makes up 10% of a person’s PFAS exposure. NHMRC notes that using 20%, as some overseas agencies do, would give higher values. Because the values cover a lifetime, NHMRC says a short period above a value is unlikely to change the risk.

The units are tiny. A nanogram per litre (ng/L) is one part per trillion, which Sydney Water compares to one drop in 20 Olympic swimming pools.

IN SYDNEY

What Sydney Water says

Sydney Water says all 9 of its filtration plants supply drinking water below the guideline values, that it publishes its PFAS monitoring results weekly, and that your drinking water is safe to drink and does not require additional treatment (Sydney Water’s PFAS page). Treated water at North Richmond has been tested weekly since October 2023.

ChemicalGuideline value since June 2025
PFOS8 ng/L
PFHxS30 ng/L
PFOA200 ng/L
PFBS1,000 ng/L (newly added)

Australian Drinking Water Guidelines, updated 25 June 2025 (NHMRC). NHMRC says households on a reticulated supply with PFAS below these values do not need additional home water treatment.

THE BLUE MOUNTAINS

What happened in the Blue Mountains

  • June 2024: testing of treated water at Cascade began; weekly from 3 October 2024
  • August 2024: WaterNSW took Medlow and Greaves Creek dams out of supply, and they remain isolated while WaterNSW completes its site investigations
  • December 2024: a $3.4 million PFAS treatment system, using granular activated carbon and ion exchange resin with a 10 year design life, started at Cascade
  • April 2025: targeted monitoring at 54 Blue Mountains sites, including customer taps; all customer tap samples met the guideline values
  • May 2025: the Jamieson and Shipley reservoirs were isolated as a precaution after the new PFOS value, then emptied, cleaned and returned to service in September 2025

WHICH FILTERS

Which water filters reduce PFAS

FilterReduces PFAS?Look for
Reverse osmosisYes, the most thoroughNSF/ANSI 58 certification
Carbon blockYes, when certifiedNSF/ANSI 53 certification for PFOA and PFOS
Granular activated carbonPartlyDepends on the amount of carbon and contact time
Ion exchange resinYes, in purpose-built unitsIndependent test results for the PFAS named
Jug filtersOnly someA certificate for PFOA and PFOS; most jugs do not claim it
Sediment and UVNoThey do other jobs
BoilingNoNHMRC says boiling does not remove or destroy PFAS

NHMRC lists granular activated carbon, ion exchange and reverse osmosis as the techniques commonly used, says they vary in how well they reduce PFAS, and that they must be maintained and replaced. It also warns that home filters can lower the useful chemicals in tap water: the chlorine that guards against bacteria, and the fluoride that protects teeth.

NSF used to test PFAS claims under a separate protocol; those claims now sit inside NSF/ANSI 53 and 58. Ask to see the certificate and check it names PFOA and PFOS.

CHECK THE CLAIM

How to check a PFAS claim before you buy

  1. Ask which standard the PFAS claim is certified to: NSF/ANSI 53 for carbon and anion exchange filters, NSF/ANSI 58 for reverse osmosis.
  2. Ask for the certificate, and check it names PFOA and PFOS, not just "chemicals".
  3. Look the exact model up in NSF’s certified product listings; a different model number in the same range may not be covered.
  4. Remember that WaterMark means the product is safe to connect to your plumbing; it does not test what the filter removes.
  5. Check the cartridge life the claim was tested at, and change the cartridge on that schedule: a spent cartridge no longer reduces anything.
  6. If there is no certificate, treat the claim as the maker’s own. NHMRC says a PFAS filter should be proven by independent testing.

WHAT PURETEC SAYS

The Puretec systems we install

Puretec lists PFAS for its FilterWall F3 and F5 whole house filters, its PureMix Z7 under-sink filter and its RO270 reverse osmosis system, and says the Z7 works best as the second stage after a whole house filter (Puretec PureMix Z7).

Puretec cites no NSF/ANSI certificate or percentage for PFAS on those product pages, so we present it as Puretec’s own claim. See reverse osmosis and under-sink filters.

QUESTIONS

Questions

WATER FILTER GUIDES

Read next

CLEAN WATER FOR YOUR FAMILY

Talk to us about your water

A licensed plumber will tell you honestly what your home needs, if anything, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Every enquiry answered in 15 minutes

4.9 from 3,000+ reviews