Whole House or Under-Sink Water Filter?

What each one does, the honest drawbacks of each, and why many families choose both.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(2,800+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 2,800+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

Choose an under-sink filter if you mainly want great drinking water at the kitchen tap: about $550 to $950 installed. Choose a whole house filter if you want filtered water at every tap and shower, and to protect your appliances: about $1,400 to $3,500 installed. Many families have both: a whole house filter for sediment and chlorine everywhere, and an under-sink filter for the finest drinking water.

SIDE BY SIDE

Under sink and whole house, compared

Under-sink filterWhole house filter
Where it goesIn the cupboard under the kitchen sinkAt the water main, usually beside the meter
What it filtersThe cold water at one kitchen tapEvery tap, shower and appliance, hot and cold
Best atThe finest drinking water (carbon block)Sediment and chlorine everywhere
Installed price$550 to $950 ($1,300 with a 3-way mixer)$1,400 to $2,400 twin; $2,200 to $3,500 larger
Yearly service$220 to $380$300 to $550
SpaceCupboard space beside the bin or dishwasherWall space outside near the meter

WHICH SUITS YOU

Which suits your home?

Your situationOur usual suggestionWhy
You mainly want better drinking waterUnder-sinkThe finest filtering where you drink, for the lowest price
You dislike the chlorine smell in the shower tooWhole houseEvery shower and tap is filtered
Older home with rusty or gritty waterWhole house, often with an under-sinkThe sediment stage protects taps, appliances and the hot water system
ApartmentUnder-sinkThe pipes that feed your unit may be common property; check with strata before any work at the meter
RentingA jug or benchtop filter, or ask the ownerAnything plumbed in needs the owner’s permission and a licensed plumber
Tank water in the houseWhole house with UVGerms need UV; a filter on its own is not enough

THE HONEST DRAWBACKS

Disadvantages of a whole house filter

  • It costs more, to install and to service
  • Its cartridges are made for high flow, so drinking water is not filtered as finely as with an under-sink carbon block
  • An undersized system, or a clogged cartridge, slows your water pressure
  • It needs wall space at the water main, out of full sun
  • It removes no fluoride and kills no germs on its own (tank water also needs UV)
  • It takes the chlorine out of every pipe in the house, so water that sits while you are away has no disinfectant left in it; NHMRC notes home filters can reduce this protective chlorine (NHMRC)

THE HONEST DRAWBACKS

Disadvantages of an under-sink filter

  • It filters one tap only: showers, baths and other taps are unchanged
  • It takes cupboard space, which can be tight with a dishwasher or boiling water unit
  • A filter tap needs a new hole in the benchtop; an inline filter on your mixer or a 3-way mixer avoids this
  • Its cartridge can need changing more often: Puretec sets the PureMix Z7 at 6 months or 60,500 litres, whichever comes first

THE BEST OF BOTH

Why many families choose both

A whole house filter takes out the sediment and most of the chlorine for every tap and shower. An under-sink carbon block filter then gives the finest drinking water at the kitchen tap, and lasts longer because the whole house filter has already caught the grit. Puretec suggests this pairing too, naming its PureMix Z7 as the second stage after a whole house filter.

As a guide to the equipment, Puretec’s suggested retail prices on 9 November 2026 were $1,183.49 for a WH2-55 whole house filter and $456.66 for a PureMix Z7, before installation.

Renting? A benchtop or jug filter needs no plumber. See whole house filters and under-sink filters.

OVER FIVE YEARS

What each costs over five years

Under-sinkWhole house, twinBoth
Supply and install (year one)$550 to $950$1,400 to $2,400$1,950 to $3,350
Yearly service, years two to five$880 to $1,520$1,200 to $2,200$2,080 to $3,720
Five-year total$1,430 to $2,470$2,600 to $4,600$4,030 to $7,070

These add up the typical Sydney ranges on this page: installation in year one, then one yearly service in each of years two to five, including GST. Filters on a 6-month cartridge schedule need a second cartridge each year on top. Your own fixed price will differ with the system and the job.

ONE NOW, ONE LATER

Starting with one and adding the other later

You do not have to do both at once. Many families start with an under-sink filter for drinking water, then add a whole house filter when they renovate, notice sediment, or decide they want filtered water in the shower. The two work independently, so adding the second takes nothing away from the first.

If you plan to add a whole house filter later, mention it when the under-sink filter goes in, so the space and pipework at the meter can be checked on the same visit. Going the other way, adding an under-sink filter after a whole house filter is a simple job inside the kitchen cupboard.

MISTAKES TO AVOID

Five mistakes to avoid

  • Buying a whole house filter only to improve the drinking water: an under-sink carbon block does that better, for less
  • Choosing a whole house filter on price alone, then finding its maximum flow is too low for a busy morning with two showers running
  • Fitting an inline under-sink filter to a mixer used for heavy washing up, then being surprised how soon the cartridge runs out of litres
  • Forgetting the running costs: the yearly service, plus the extra cartridge for systems on a 6-month schedule
  • Treating either type as a germ barrier for tank water: NSW Health lists UV, chlorine or boiling for that, with filters best used before them

BEFORE YOU DECIDE

Questions to answer before you choose

  • What do I most want: better drinking water, filtered showers, or both?
  • Is my home on mains water, tank water, or both?
  • Do I own the pipes at the meter, or are they strata common property?
  • How many showers and taps run at once on a busy morning?
  • What will the cartridges cost each year, and who will change them?

QUESTIONS

Questions

WATER FILTER GUIDES

Read next

CLEAN WATER FOR YOUR FAMILY

Talk to us about your water

A licensed plumber will tell you honestly what your home needs, if anything, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Every enquiry answered in 15 minutes

4.9 from 3,000+ reviews