Water Filter Cost in Sydney

Installed prices for every type of water filter, what moves the price, and the yearly running costs.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(2,800+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 2,800+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

Typical Sydney prices for a Puretec system supplied and installed by a licensed plumber, including GST: an under-sink filter $550 to $950, reverse osmosis $1,100 to $1,900, a whole house filter $1,400 to $3,500, a whole house filter with UV $2,800 to $3,800 and a rainwater system $2,200 to $3,800. Puretec’s designer FilterWall units cost more. Then allow for a yearly service of about $220 to $550. You get a fixed price before any work starts.

WHAT IT COSTS

Installed prices

SystemInstalled priceNotes
Under-sink filter with its own filter tap$550 to $950Puretec PureMix Z7 inline on your mixer, or a Z1 with a filter tap. About $1,300 with a 3-way mixer tap.
Reverse osmosis under sink$1,100 to $1,900Puretec RO270. Needs a drain connection and cabinet space.
Whole house filter, twin stage$1,400 to $2,400Puretec WH2 dual stage, at the water main.
Whole house filter, triple stage or large$2,200 to $3,500Bigger homes, higher flow, or added scale control. Designer FilterWall units cost more.
Whole house filter with UV$2,800 to $3,800A Puretec Hybrid system. Needs a power point nearby.
Rainwater tank filter with UV$2,200 to $3,800A Puretec Hybrid rainwater system, sized to your pump.
Yearly service: under-sink$220 to $380New cartridges and a check, parts and labour.
Yearly service: reverse osmosis$280 to $450Both pre-filters; the membrane every 18 to 24 months.
Yearly service: whole house twin$300 to $550Both cartridges, housings cleaned, O-rings checked.

Prices are typical Sydney market ranges for supply and installation, checked on 1 November 2026.

THE EQUIPMENT

What the Puretec equipment itself costs

Puretec equipmentSuggested retail price, incl. GST
Z1-MW-K under-sink kit (faucet sold separately)$367.69
PureMix Z7 inline under-sink filter$456.66
Z7-R replacement cartridge$205.28
WH2-30 whole house, dual stage$892.43
WH2-55 whole house, dual stage$1,183.49
RO270 reverse osmosis$1,183.72
Hybrid R10 rainwater filter with UV$3,028.81
FilterWall F3$3,144.99 to $3,818.83
FilterWall F5$4,660.77 to $5,536.92
FilterWall F6$5,022.99 to $5,899.01

These are Puretec’s suggested retail prices for the equipment alone, including GST, as listed on its website on 9 November 2026; Puretec notes that reseller prices may vary (Puretec). Installation, valves, fittings and any pipework changes come on top.

They explain two things in the table above. A FilterWall install costs more than the whole house ranges, because the FilterWall equipment alone lists above them. And the Hybrid UV systems sit at the top, because the equipment is the larger part of the price.

WHAT A FIXED PRICE SHOULD INCLUDE

What a fixed price should cover

  • The system itself, with every cartridge, valve and fitting it needs
  • A pressure limiting valve, where your pressure is above 500 kPa
  • A bypass and isolation valves for a whole house system
  • The tap or faucet, and drilling the benchtop or sink if needed
  • A drain connection for reverse osmosis
  • Flushing, leak testing, and showing you how to look after it
  • Taking away the packaging and any old parts

If we find something the quote didn’t cover, we stop and give you a revised fixed price before continuing.

WHAT MOVES THE PRICE

What makes a job cost more

  • A new tap hole through a stone benchtop or an undermount sink
  • A cramped cupboard, or one already holding a dishwasher, bin or boiling water unit
  • Reverse osmosis that needs a drain connection or a booster pump
  • A water main that is hard to reach, pipework to reroute, a bypass or a pressure limiting valve
  • No power point near a UV system (an electrician’s cost is extra)
  • Choosing a designer unit such as a FilterWall over a standard housing
  • Work outside business hours: our $0 call-out applies Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber

RUNNING COSTS

What it costs to run

FilterYearly service, parts and labour
Under-sink$220 to $380
Reverse osmosis$280 to $450
Whole house, twin stage$300 to $550
UV systemsQuoted with your service: a new lamp every year

Check the cartridge schedule as well as the price. Puretec sets its PureMix Z7 at 6 months or 60,500 litres and its RO270 pre-filters at 6 months or 8,000 litres, whichever comes first, so those systems need a cartridge between yearly services. Puretec listed the Z7-R cartridge at $205.28.

Changing Quick Twist cartridges yourself saves the labour. See how often to change cartridges.

A worked example for a PureMix Z7 under-sink filter: year one is the supply and install, about $550 to $950. Each year after that, allow about $220 to $380 for the yearly service, plus a second Z7-R cartridge at Puretec’s listed $205.28 if you twist it in yourself at the 6-month mark.

COMPARING QUOTES

How to compare two quotes fairly

  • Is it the same brand and model, or a cheaper look-alike?
  • Are the removal claims certified to an NSF/ANSI standard, or the maker’s own?
  • Is the product WaterMark certified, and is the installer a licensed plumber?
  • Is the price fixed, with the valves, the drilling and the drain connection included?
  • What do the cartridges cost, and how often do they need changing?
  • What warranty applies, and does it depend on the maker’s own cartridges?

A cheaper system with dearer, more frequent cartridges can cost more over five years than a dearer one that is cheaper to run.

IF THE BUDGET IS TIGHT

If the budget is tight

Sydney mains water is safe to drink without a filter. If taste is the issue, a jug or benchtop filter costs far less and needs no plumber; if you rent, it is the only option without the owner’s consent.

For tank water there is no cheap shortcut for drinking: NSW Health recommends people in urban areas use the public supply for drinking and cooking, and tank water used in the house needs filtration and UV.

QUESTIONS

Questions

WATER FILTER GUIDES

Read next

CLEAN WATER FOR YOUR FAMILY

Talk to us about your water

A licensed plumber will tell you honestly what your home needs, if anything, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Every enquiry answered in 15 minutes

4.9 from 3,000+ reviews