Whole House Water Filters

Filtered water at every tap, shower and appliance, fitted at your water main by a licensed plumber.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(2,800+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 2,800+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

A whole house filter is fitted where the water enters your home, usually near the water meter, so every tap, shower and appliance after it gets filtered water, the hot water system included. A sediment stage catches sand and rust, then carbon takes out the chlorine taste and smell. A dual stage Puretec WH2 costs about $1,400 to $2,400 installed and a larger or triple stage system $2,200 to $3,500; Puretec’s designer FilterWall units cost more. Puretec advises new cartridges every 6 to 12 months.

HOW IT WORKS

Two or three stages at your water main

Water from the street passes through a sediment cartridge first. It catches sand, rust and silt by size, measured in microns (a micron is a thousandth of a millimetre), and stops the next stage clogging.

It then flows through carbon, which takes out the chlorine taste and smell. Puretec’s FilterWall F5, for example, runs a sediment cartridge, a finer polyspun sediment cartridge and a carbon block, each 20 inches tall. Sydney Water says its water carries chlorine and ammonia at low and safe concentrations; together they make chloramine, which needs more contact time with carbon, so the system is sized to your home’s flow.

We fit a bypass so you are never without water while a cartridge is changed, and keep the filter out of direct sun.

A Proximity plumber talking with a customer in her kitchen

WHAT IT DOES AND DOESN’T

What it removes, honestly

Removes or reducesResultNotes
Sand, rust and siltYesThe sediment stage, the reason most people notice clearer water
Chlorine taste and smellYesPuretec lists chlorine for its FilterWall and WH2 systems; its product pages give no percentage
ChloraminePartlyNeeds a larger carbon stage and more contact time
PFASPuretec says yesPuretec lists PFAS for the FilterWall F3 and F5; it cites no NSF/ANSI certificate for this
Bacteria and virusesNoAdd a UV steriliser for tank or bore water
ScaleSome modelsPuretec’s F4 and F6 add scale control; that slows scale forming, it does not take the calcium out
FluorideNoOnly reverse osmosis removes a meaningful amount

Facts checked 9 November 2026. Sources: Sydney Water, NSW Health, Standards Australia and Puretec.

WHO IT SUITS

Is it right for you?

Families

Filtered water in the shower and bath, not just at the kitchen tap.

Older homes

Rust and sediment from old pipes caught before they reach your taps and appliances.

Your appliances

Less sediment reaching the hot water system, dishwasher and washing machine.

SIZING IT RIGHT

Sizing a whole house filter for your home

The number that matters is the maximum flow, in litres per minute: how much water the filter can pass when several taps, showers and appliances run at once. Too small, and you feel it as a weak shower whenever the washing machine fills. Puretec publishes the maximum flow for each of its systems:

Puretec systemStagesMaximum flowNotes
WH2-30Two30 L/minSediment and chlorine
WH2-55Two55 L/minSediment and chlorine, heavy duty
FilterWall F3 and F4Three30 L/minPuretec says small to medium homes; the F4 adds scale control
FilterWall F5 and F6Three55 L/minPuretec says medium to large homes; the F6 adds scale control

A home with one bathroom rarely runs more than a shower and a tap at the same time. A home with three bathrooms, a pool top-up and irrigation can run many at once. We count your bathrooms, ask how many people shower in the morning rush and whether the garden taps will run through the filter, then choose a flow that keeps your pressure where it is now.

Pressure matters too. Puretec rates the FilterWall F5 for 200 to 875 kPa. Where the street pressure is above 500 kPa, the plumbing standards call for a pressure limiting valve, which also protects your tapware and hot water system (Puretec whole house range).

ON THE DAY

What installing one involves

  1. We find where the water service enters your home and check the meter, the isolation valve and the pressure. Not sure where yours is? See how to find your water meter.
  2. We agree the spot with you: on the wall or freestanding near the meter, with room to lift out 20 inch cartridges, out of direct sun and away from car doors and bins.
  3. We decide together which taps go through the filter. Garden taps and irrigation are often left on unfiltered water, so you are not using cartridge capacity to water the lawn.
  4. We turn the water off, cut the filter into the line with isolation valves and a bypass, and add a pressure limiting valve where the pressure needs one.
  5. We turn the water back on, check every joint for leaks, flush the new cartridges until the water runs clear, and run the taps through the house to clear air and loose sediment.
  6. We show you the bypass, where the cartridge dates are written, and when the next change is due.

Most installs are a planned job booked in business hours, with a fixed price agreed before we start. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

THE HONEST TRADE-OFF

Chlorine, and water that sits in your pipes

Sydney Water adds chlorine so the water stays protected from germs all the way to your tap. A whole house carbon filter takes that chlorine out at the front door, which is why the water tastes better, but it also means the water inside your pipes no longer carries any disinfectant. NHMRC makes the same point: home filters can reduce the chlorine that protects water from bacterial contamination (NHMRC).

In everyday use this rarely matters, because water moves through the pipes all day. It matters after the house has been empty. When you come home from a holiday, run the cold taps and showers for a couple of minutes before you drink, and keep the cartridges on schedule. Puretec’s own user guides warn that its carbon filters may increase the bacterial content of the water unless other treatment is provided, so an overdue cartridge is not one to leave in place.

MYTH OR FACT

Whole house filter myths

MythFact
A whole house filter makes Sydney water safe to drinkIt is already safe. Sydney Water says its water meets the Australian Drinking Water Guidelines. The filter improves taste and smell and catches sediment.
It softens the waterSydney water is already soft, at about 57 mg/L of hardness. Scale control models slow scale forming; they do not take the calcium out the way a softener does.
It takes out fluorideNo. Sediment and carbon leave fluoride in. Only reverse osmosis at a drinking tap removes a meaningful amount.
Once it is in, you can forget about itPuretec advises new cartridges every 6 to 12 months for the FilterWall F5, sooner with more sediment. An overdue filter slows your water and stops working.
Bigger is always betterAn oversized system costs more to buy and to service. The right size matches your home’s busiest moment, not the biggest unit in the range.

BEFORE YOU BUY

Questions to ask your plumber

  • What maximum flow is it rated for, and how does that compare with my home at its busiest?
  • Which taps will be filtered, and will the garden taps be left off it?
  • Is my water pressure above 500 kPa, and is a pressure limiting valve included in the price?
  • Which of the maker’s removal claims are certified to an NSF/ANSI standard, and which are its own?
  • Where will it sit, and is there room to lift the cartridges out?
  • What do the replacement cartridges cost, and how often will mine need changing?
  • Is the price fixed, and does it include the bypass, the valves and any pipework changes?

WHAT IT COSTS

Prices in Sydney

Typical Sydney prices, supplied and installed by a licensed plumber, including GST. You get a fixed price before any work starts.

SystemInstalled priceNotes
Whole house filter, twin stage$1,400 to $2,400Puretec WH2 dual stage, at the water main.
Whole house filter, triple stage or large$2,200 to $3,500Bigger homes, higher flow, or added scale control. Designer FilterWall units cost more.
Whole house filter with UV$2,800 to $3,800A Puretec Hybrid system. Needs a power point nearby.
Yearly service: whole house twin$300 to $550Both cartridges, housings cleaned, O-rings checked.

WHAT WE INSTALL

The Puretec system we fit

We install Puretec WH2 dual stage systems and the FilterWall F series. Puretec lists the F3 and F5 for PFAS, chlorine and sediment, and the F4 and F6 for chlorine, sediment and scale. A FilterWall stands on its own under an aluminium cover, which suits a visible spot beside the front path.

A FilterWall costs more than a WH2. Puretec’s suggested retail prices on 9 November 2026, for the equipment alone, were $3,144.99 to $3,818.83 for an F3, $4,155.87 for an F4, $4,660.77 to $5,536.92 for an F5 and $5,022.99 to $5,899.01 for an F6, against $892.43 for a WH2-30 and $1,183.49 for a WH2-55 (Puretec). So a FilterWall install sits above the ranges in the price table; we give you a fixed price for the exact model.

Warranty: 10 years on FilterWall and WH2 systems (1 year parts and labour, then 9 years parts), used with Puretec cartridges (Puretec warranty).

Puretec advises new cartridges every 6 to 12 months for the FilterWall F5, depending on water quality and use, and sooner where there is more sediment (Puretec FilterWall F5). The sediment cartridge clogs faster after storms, burst mains or water main work in your street. A yearly service for a twin system costs about $300 to $550.

QUESTIONS

Questions about whole house filters

MORE TYPES

Other water filters

READ MORE

Water filter guides

CLEAN WATER FOR YOUR FAMILY

Talk to us about your water

A licensed plumber will tell you honestly what your home needs, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Licensed NSW 285594C

Every enquiry answered in 15 minutes

Lifetime labour warranty

4.9 from 3,000+ reviews