“From scheduling an appointment to the actual repair, everything was seamless and efficient. Our plumber, Jack, was professional, knowledgeable and went above and beyond to ensure our issue was fixed to our satisfaction. The team provided us with a clear explanation of the problem and the solution, and we appreciated their honesty and transparency.”

Hot Water Systems in Sydney
Repairs and replacement for every type and brand, 24/7, by licensed plumbers who have done 1,125 hot water jobs since 2019.
$0 CALLOUT FEE | FREE QUOTES | SAME DAY SERVICE

NOW SERVICING NORTH SYDNEY
WE ARE AVAILABLE
- 35+ Years of Combined Experience
- Yes, a Real Plumber Reads These Messages Too
- The Kettle Is Always On at Head Office
- $0 Call Out Fees
- Every Job Photographed, Every Price Upfront
- We Answer the Phone. Revolutionary, We Know.
- Trusted by 15,000+ Sydney Families
- No Call Centres. You Get a Human in Sydney
- Your Neighbours Probably Have Our Fridge Magnet
- Onsite in 30 Minutes Guaranteed
- Boots Off at the Door. Every Single Time.
- 2,800+ Google Reviews and Counting
- In the community For the community
THE SHORT ANSWER
In short
Proximity Plumbing repairs and replaces every type of hot water system across Sydney, 24/7: electric, gas storage, continuous flow, heat pump and solar, in every brand Reece sells. Our licensed plumbers have completed 1,125 hot water jobs since 2019. A new system costs about $1,000 to $8,000 installed depending on the type, and heat pumps and solar are the cheapest to run. $0 call-out in business hours, a fixed price before any work starts and a lifetime labour warranty.
CHOOSE A SYSTEM
Every type of hot water system, compared
Five kinds of hot water system, compared. Prices are typical Sydney ranges, supplied and installed with GST.
| Type | Upfront cost | Running cost | Best for | Installed price |
|---|---|---|---|---|
| Electric storage | Lowest | Among the highest, lower on off-peak | Units, small homes, a low upfront price | $1,000 to $2,900 |
| Gas storage | Low | Among the higher | A quick like-for-like swap | $2,100 to $3,300 |
| Continuous flow | Low to medium | Lower than gas storage | Busy homes that never want to run out | $1,700 to $3,300 |
| Heat pump | Higher, less discounts | Among the lowest | Replacing electric; homes with solar panels | $3,800 to $6,650 |
| Solar | Highest, less STCs | Among the lowest | A sunny north-facing roof | $4,500 to $8,000 |
Facts checked 1 November 2026. Sources: YourHome, energy.gov.au, Building Commission NSW and Rheem’s sizing guide.
EXPLORE
Every type of hot water system
ACROSS SYDNEY
Hot water across Sydney
1,125
hot water jobs across Sydney since 2019
From our job records (ServiceM8 and ServiceTitan), July 2019 to October 2026. Completed jobs only.
REPAIR OR REPLACE?
Repair or replace your hot water system?
Repair it when one part has failed on a system that is not too old: a tempering valve, an element, a thermostat, a relief valve or a gas ignition fault. Hot water repairs.
Replace it when the tank itself is leaking, because a leaking tank cannot be repaired, or when the system is near the end of its life and the repair is costly. Most hot water systems last about 8 to 10 years (Solar Victoria). Hot water replacement.
Either way, you get a fixed price before any work starts, and the choice is yours.
COMMERCIAL
Commercial hot water
Cafes, gyms, strata buildings, schools and workplaces need hot water for heavier demand. We install and service commercial storage systems and high-output continuous flow units of 32 to 50 litres per minute, and systems configured for bigger loads.
We work to your building’s schedule, with work orders and compliance paperwork. Commercial plumbing.
BOILING AND CHILLED WATER
Boiling and chilled water taps
We supply and install Billi boiling and chilled water units: filtered boiling and chilled water from one tap, with the unit hidden in the cupboard below. They are sized by the number of people served, from about 10 to 60, so they suit kitchens, offices and staff rooms.
They filter the water as well. See our water filters too.
THE RULES IN NSW
Temperature rules every installation must meet
Storage hot water must be heated to at least 60°C at least once every 7 days, to stop bacteria such as Legionella growing (YourHome).
Water at showers, baths, basins and bidets must be no hotter than 50°C. In NSW a tempering valve or another approved device is required on every new installation and every replacement, including a like-for-like swap (Building Commission NSW). That is why a proper replacement quote includes one, and why faulty tempering valves are among the most common hot water faults in our job records.
FROM OUR JOB RECORDS
What we see on Sydney hot water jobs
Since 2019 our licensed plumbers have completed 1,125 hot water jobs. The most common causes we recorded:
Water leak: 60 jobs
Faulty tempering valve: 54 jobs
Burst water pipe: 40 jobs
Faulty hot water element or thermostat: 22 jobs
Faulty pressure relief valve: 11 jobs
Half of our priced hot water jobs cost between $495 and $4,015, with a median of $1,980: repairs and replacements together, every type.
REVIEWS BY PROBLEM
What your neighbours say
Real reviews from our customers across Sydney, in their own words. Read every review, good and bad, on Google.
Repairs
Hot water
Leaks
Renovations
WHERE WE’VE DONE THIS
Where we’ve done the most hot water work
The suburbs where we’ve done the most hot water work. Each links to its local page once that page is published.
From our job records (ServiceM8 and ServiceTitan), July 2019 to October 2026. Completed jobs only.
AT A GLANCE
Key facts
Service
Hot water repairs and replacement
Types
Electric, gas storage, continuous flow, heat pump and solar
Brands
Every brand Reece sells
Available
24/7: 365 days a year
Call-out fee
$0 Monday to Friday, 7:00am to 5:00pm. $199 to $399 outside those hours
Licence
NSW Contractor Licence 285594C
Warranty
Lifetime labour warranty
QUESTIONS
Hot water questions
READ MORE
Hot water guides

SYDNEY’S 24/7 PLUMBER
No hot water? Call us now
A licensed plumber who fixes or replaces every brand, with a fixed price before any work starts.
Licensed NSW 285594C
$0 call-out in business hours
Lifetime labour warranty
4.9 from 3,000+ reviews

