
Solar Hot Water Systems
Hot water heated by the sun on your roof, with a gas or electric booster for cloudy days.
$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

NOW SERVICING NORTH SYDNEY
WE ARE AVAILABLE
- 35+ Years of Combined Experience
- Yes, a Real Plumber Reads These Messages Too
- The Kettle Is Always On at Head Office
- $0 Call Out Fees
- Every Job Photographed, Every Price Upfront
- We Answer the Phone. Revolutionary, We Know.
- Trusted by 15,000+ Sydney Families
- No Call Centres. You Get a Human in Sydney
- Your Neighbours Probably Have Our Fridge Magnet
- Onsite in 30 Minutes Guaranteed
- Boots Off at the Door. Every Single Time.
- 3,000+ Google Reviews and Counting
- In the community For the community
THE SHORT ANSWER
In short
A solar hot water system heats water with collectors on your roof and stores it in a tank, with a gas or electric booster for cloudy days. Depending on the climate, the sun can provide up to 90% of your hot water, and with heat pumps it is usually the cheapest to run. It costs the most to buy, about $4,500 to $8,000 installed in Sydney before STCs and discounts, and the collectors need a sunny, north-facing roof.
HOW IT WORKS
Collectors on the roof, a tank and a booster
Collectors on the roof absorb the sun’s heat and pass it to the water. In a close-coupled system the tank sits on the roof above the collectors, with no pump. In a split system the tank stays on the ground and a pump moves the water, which costs more to buy and maintain.
Collectors work best facing true north; up to 45° off north makes little difference. A gas or electric booster tops up the heat on cloudy days, and a timer or off-peak control stops it boosting before the sun has a chance (YourHome).
Closed-circuit systems protect against frost; their fluid needs checking and replacing.

SIZES
Tank sizes by household
Solar systems are sized by their tank in litres and their booster. Reece lists solar systems with electric or gas boosting and tanks from about 160 L to 410 L.
| Tank size | Suits |
|---|---|
| 160 to 180 L | About 2 to 3 people |
| 250 to 270 L | About 4 people |
| 315 to 325 L | About 5 people |
| 400 to 410 L | About 6 or more people |
Facts checked 1 November 2026. Sources: YourHome, energy.gov.au, Building Commission NSW and Rheem’s sizing guide.
YOUR ROOF
Will your roof suit solar hot water?
Collectors work best facing true north, but YourHome says they can face up to 45 degrees either side of north without much loss. Shade matters more: trees or buildings that shade the roof in winter, when the sun is low, cut output just when you need it most (YourHome).
The ideal tilt is close to your latitude, about 34 degrees in Sydney, but most systems simply follow the roof pitch, often 20 to 30 degrees, and work well.
A close-coupled system puts a full tank of water on the roof, so the roof framing has to carry the weight, and the tank has to be reachable for service. A split system keeps the tank on the ground, which is easier on the roof and less visible, but needs a pump and more upkeep.
Planning: solar hot water can be exempt or complying development under the State Environmental Planning Policy (Transport and Infrastructure) 2021, but it cannot be exempt development on a lot with a heritage item unless the system is not visible from any road (NSW Planning). On a heritage-listed home, check with your council before you commit.
THE BOOSTER
Getting the booster right
Much of what a solar system saves can be lost to a booster that switches on at the wrong time. If your household uses most of its hot water in the morning, the tank has cooled overnight, and a booster on a thermostat will reheat it before the sun has had a chance (YourHome).
Energy NSW suggests using a manual booster sparingly, switching it on only after several cloudy or rainy days in a row, or using a timer to choose between solar and off-peak heating (Energy NSW). Newer models can be set from an app.
Electric boosters use an element inside the tank; gas boosters use a burner. A gas booster recovers faster, which suits big households, but it adds gas work and a gas certificate to the job.
Whatever the booster, the stored water still has to reach 60°C regularly to keep Legionella away, so a timer must never be set to stop that happening.
THE HONEST VIEW
Good to know before you choose
| What to know | |
|---|---|
| Running cost | Up to 90% of your hot water from the sun, depending on the climate. |
| Upfront cost | The most expensive system to buy, before STCs and discounts. |
| Your roof | Needs a sunny, unshaded roof facing within about 45° of north. |
| Booster | Gas or electric; set it so it does not boost before the sun gets to work. |
| Upkeep | Closed-circuit fluid and the booster need checking; split systems have a pump to maintain. |
| Discounts | Listed systems earn STCs, and eligible ones the NSW Energy Savings Scheme discount. |
WHO IT SUITS
Is it right for your home?
Sunny roofs
A north-facing roof without shade.
Long-term owners
The highest upfront price, repaid over years of low running costs.
Bigger households
More hot water used means more saved.
WHAT IT COSTS
Prices in Sydney
Typical Sydney prices, supplied and installed by a licensed plumber. You get a fixed price before any work starts.
| System | Installed price | Notes |
|---|---|---|
| Solar hot water, 250 to 410 L | $4,500 to $8,000 | Before STCs and NSW discounts |
| Gas boosting | About $300 to $600 more | Instead of an electric booster |
Typical Sydney market ranges for supply and installation, including GST (1 November 2026). Removal of the old unit is usually included; a tempering valve is about $170 to $460 where needed. Call-out: $0 Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
DISCOUNTS
Discounts for heat pump and solar hot water
Two schemes cut the price of an eligible heat pump or solar system. The NSW Energy Savings Scheme gives an upfront discount on the quote, which Energy NSW puts at up to $640 when a heat pump replaces an electric system and up to $330 when it replaces gas (Energy NSW), and up to $900 when a solar system replaces electric and up to $550 when it replaces gas (Energy NSW). These figures are indicative, and not every model or home qualifies.
Federal small-scale technology certificates (STCs) also apply to listed heat pumps and solar systems; their number falls each year until the scheme ends in 2030, and they are often already taken off advertised prices (Clean Energy Regulator).
Both are arranged through the installer before the work starts. We take part in the NSW Energy Savings Scheme, so we arrange the discount for you and show it on your written quote. Ask us which models qualify for your home, or read NSW hot water rebates explained.
BRANDS WE INSTALL
Brands we supply and install
We supply and install every solar hot water brand Reece sells, including Rheem and Thermann, with electric or gas boosting, as close-coupled or split systems.
We tell you the warranty on the collectors, tank and booster of the exact model before you choose.
OPEN OR CLOSED
Open circuit, closed circuit, pumped or not
In an open-circuit system, your water runs through the collectors on the roof. In a closed-circuit system, a separate heat-transfer fluid runs through the collectors and passes its heat to the tank through a heat exchanger. Closed circuits protect the collectors from frost damage, but YourHome notes the fluid must be checked and replaced regularly.
A passive, or thermosiphon, system needs no pump: cooler water sinks to the collectors, warms and rises back into the roof tank. An active system pumps water between a ground tank and the roof, which costs more to buy, uses some power and has a pump that will one day need replacing.
Frost is uncommon in most of Sydney but does happen in colder pockets out west, which is worth weighing when you choose between the two.
WARNING SIGNS
Signs your solar hot water needs attention
| What you notice | What it often means | How urgent |
|---|---|---|
| Hot water only when the booster is on | Shaded or dirty collectors, a failed pump or controller on a split system, or lost fluid in a closed circuit | Soon. You are paying booster prices for solar hot water |
| Power or gas bills creeping up | The booster running at the wrong times, a timer reset by a power cut, or collectors losing performance | Plan. Check the booster settings first |
| Water dripping from the roof tank or down the wall | Relief valve discharge, a leaking fitting, or a tank or collector that has failed | Soon. Some discharge on very hot days can be normal; a steady stream is not |
| A pump running all the time, or not at all | A controller or sensor fault on a split system | Soon. Note any message on the controller |
| Rusty or discoloured hot water | Corrosion in the tank once the anode is spent | Plan. On an older tank, start pricing a replacement |
| Cracked glass or damaged collectors | Storm or hail damage, or ageing seals | Soon. Photograph it for insurance before anything is moved |
LOOKING AFTER IT
Looking after a solar system, from the ground
- Keep tree branches trimmed so they do not shade the collectors, and have the panels cleaned when they get dirty (Energy NSW); leave anything on the roof to a professional
- Have the closed-circuit fluid, and the pump on a split system, checked as the owner’s guide sets out
- Make sure exposed hot pipes are insulated, including the pipe to the relief valve, which YourHome says reduces heat loss
- Have the relief valve, and the expansion control valve if one is fitted, looked after as the guide sets out
- Check the booster timer after every power cut
REPLACING AN OLD SYSTEM
Replacing all of it, or only part
An ageing solar system does not always have to go in one piece. In NSW, replacing only the solar collector panels does not call for a new tempering device, while replacing the water heater itself, like-for-like or not, does (Building Commission NSW).
If the roof tank has failed, the choices are another close-coupled system, a split system with the tank on the ground, or a different type altogether, such as a heat pump, which needs no roof space. The discounts differ for each, so we price them side by side.
THE RULES IN NSW
Temperature rules every installation must meet
Storage hot water must be heated to at least 60°C at least once every 7 days, to stop bacteria such as Legionella growing (YourHome).
Water at showers, baths, basins and bidets must be no hotter than 50°C. In NSW a tempering valve or another approved device is required on every new installation and every replacement, including a like-for-like swap (Building Commission NSW). That is why a proper replacement quote includes one, and why faulty tempering valves are among the most common hot water faults in our job records.
FROM OUR JOB RECORDS
What we see on Sydney hot water jobs
Since 2019 our licensed plumbers have completed 1,125 hot water jobs. The most common causes we recorded:
- Water leak: 60 jobs
- Faulty tempering valve: 54 jobs
- Burst water pipe: 40 jobs
- Faulty hot water element or thermostat: 22 jobs
- Faulty pressure relief valve: 11 jobs
Half of our priced hot water jobs cost between $495 and $4,015, with a median of $1,980: repairs and replacements together, every type.
QUESTIONS
Questions about solar hot water
MORE TYPES
Other hot water systems
READ MORE
Hot water guides

SYDNEY’S 24/7 PLUMBER
Talk to us about your hot water
A licensed plumber will size the right system for your home and give you a fixed price before any work starts.
Licensed NSW 285594C
$0 call-out in business hours
Lifetime labour warranty
4.9 from 3,000+ reviews

