Electric Hot Water Systems

The simplest hot water system to buy and install, sized to your household and your power tariff.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(3,000+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 3,000+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

An electric storage system heats water in an insulated tank with an element, like a big kettle. It is the cheapest system to buy and install, but generally one of the more expensive to run. Sizes run from about 25 L to 400 L: a 125 L tank suits up to 3 people and a 250 L tank up to 5. On off-peak (controlled load) power it costs less to run. A family-size replacement costs about $1,800 to $2,900 installed in Sydney.

HOW IT WORKS

An element heats a tank of water

Cold water enters the bottom of an insulated tank, an electric element heats it, and hot water is drawn from the top. A thermostat keeps it at 60°C or more, which stops bacteria growing.

Many Sydney homes run larger tanks on a controlled load (off-peak) circuit, which is cheaper per unit of power. Ausgrid’s Controlled Load 1 runs at least 6 hours a day and suits 250 L to 630 L tanks; Controlled Load 2 runs at least 16 hours a day and suits 100 L to 250 L tanks (Ausgrid).

Tank and pipe heat losses can be about 30% of the energy a storage system uses, so good insulation and a sensible size matter.

A Proximity plumber with a customer at her front door

SIZES

Tank sizes by household

Electric tanks are sized in litres. One person uses about 50 litres of hot water a day. Reece lists electric tanks from about 25 L to over 315 L.

Tank sizeSuits
25 to 50 LA single basin, a kitchenette or a small flat
125 LUp to 3 people
160 L4 people
250 LUp to 5 people
315 LUp to 6 people
400 LUp to 9 people

Facts checked 1 November 2026. Sources: YourHome, energy.gov.au, Building Commission NSW and Rheem’s sizing guide.

RUNNING COSTS

What decides the cost of running an electric tank

An electric element turns almost all of the power it uses into heat, but a heat pump moves several times more heat for the same power. YourHome puts a new electric storage system at a coefficient of performance of about 0.95, against about 3 to 5 for a heat pump (YourHome).

So the bill comes down to when the tank heats and what you pay for that power. A tank on the general tariff heats whenever it needs to, at the full rate. A tank on a controlled load circuit heats only at set times on a cheaper rate, and a tank set to heat in the middle of the day can run on your own rooftop solar.

Size changes the picture too. YourHome says tanks larger than 250 litres suit off-peak operation, while smaller tanks can run out before the controlled load switches back on, which can make them dearer to run. A small tank on the general tariff can still make sense for a household that uses little hot water.

Keep the thermostat at 60°C. Any higher and the tank simply burns extra power holding heat you do not need.

WARNING SIGNS

Signs your electric hot water system is in trouble

What you noticeWhat it often meansHow urgent
No hot water at allA tripped circuit breaker or safety switch, a failed element or thermostat, or an off-peak tank that emptied before its heating periodToday. Check the switchboard once, then read the safe checks below
The safety switch trips when the tank heatsOften an element that has failed and is leaking currentLeave it off. Do not keep resetting it; call us
Lukewarm water, or it runs out earlyThe element or thermostat failing, sediment, or a tank too small for the householdSoon. A single part is often all it needs
Hissing or crackling while it heatsScale or sediment building up around the elementPlan. Worth checking on an older tank
Steady water from the relief valve drainA worn relief valve, or water pressure or temperature too highSoon. A little while heating is normal; a steady flow is not
Rusty hot water or a wet baseA spent anode and a tank that has started to corrode, or a tank that has failedPlan or replace. Turn off the cold water if it is leaking

THE HONEST VIEW

Good to know before you choose

What to know
Cheapest to buyThe lowest purchase and installation price of any system.
Running costGenerally one of the more expensive systems to run, unless it is on off-peak power.
Off-peakA larger tank on controlled load can heat overnight and in the day on cheaper power.
Runs outWhen the tank is empty you wait for it to reheat, so size it for your busiest morning.
SpaceNeeds room for the tank, inside or out.
Upgrade pathA heat pump uses about 30% of the energy of a conventional electric system, with discounts available.

WHO IT SUITS

Is it right for your home?

Units and small homes

A compact tank where gas is not available.

Lower upfront cost

The cheapest system to buy and install today.

Off-peak homes

Homes already wired for controlled load power.

WHAT IT COSTS

Prices in Sydney

Typical Sydney prices, supplied and installed by a licensed plumber. You get a fixed price before any work starts.

SystemInstalled priceNotes
Small electric tank, 50 to 125 L$1,000 to $2,400Like-for-like replacement
Family electric tank, 250 to 315 L$1,800 to $2,900Like-for-like replacement

Typical Sydney market ranges for supply and installation, including GST (1 November 2026). Removal of the old unit is usually included; a tempering valve is about $170 to $460 where needed. Call-out: $0 Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

BRANDS WE INSTALL

Brands we supply and install

We supply and install every electric hot water brand Reece sells, including Rheem, Thermann and Everhot, from compact 25 L units to 400 L tanks.

Tank warranties are typically 5 to 10 years for glass-lined tanks and 10 to 15 years for stainless steel. Rheem, for example, gives a 12-year cylinder warranty on its 80 to 400 L electric range. We tell you the warranty on the exact model before you choose.

SAFE CHECKS

What you can safely check, and what to leave alone

You can look at your switchboard and reset a tripped hot water breaker or safety switch once. If it trips again, leave it off: a breaker that trips as the tank heats usually means an element has failed, and resetting it again and again is not safe.

Never take the cover off the element and thermostat compartment. Behind it are live terminals at full mains voltage, and the thermostat is set to hold the water at 60°C or more for a reason. Elements and thermostats are replaced with the power isolated, by a licensed tradesperson.

Going away? YourHome says you can turn electric hot water off at the switchboard to save energy, but when you come home, run it for several hours so the stored water is heated above 60°C for at least 35 minutes before you use it, to kill any Legionella bacteria (YourHome). Some systems have a holiday mode that does this for you.

UNITS AND APARTMENTS

Electric hot water in units and apartments

In many Sydney units the tank lives in a cupboard, a laundry or on a balcony. An indoor tank loses less heat, but YourHome notes it needs a drip tray drained to a suitable waste point, so a failed tank does not flood the floor or the unit below.

Space is the usual limit. Replacement tanks of the same capacity are not always the same height or width, so the cupboard, its door and the path out of the building all need measuring before anyone orders a tank. In a strata building, check your by-laws on who maintains the hot water system, and tell the strata manager if a leak has reached common property. Who pays for plumbing repairs in strata.

Electric instantaneous units suit some apartments, but they draw up to 28 kW and need a three-phase supply that many homes do not have; single-phase models only have enough flow for a basin, not a shower (YourHome). Where a tank will not fit, a split heat pump with the tank inside and the outdoor unit on a balcony can be an option, subject to space, noise and the building’s rules.

GOT ROOFTOP SOLAR?

Running an electric tank on your own solar power

If you have solar panels, an electric tank that heats in the middle of the day can use power you would otherwise sell back for very little. YourHome notes that controlled loads are increasingly switched on during the day to soak up excess solar in the grid as well.

There are three ways to do it: the tank’s own timer, an external timer on the switchboard, or a solar diverter. Take care with each. YourHome warns a timer must never be set so short that it overrides the tank’s built-in protection against Legionella, and that solar diverters are relatively expensive, are not well covered by Australian standards, may void the tank’s warranty and are not compatible with heat pumps.

Building a new home or doing work that needs BASIX? YourHome notes higher-emission systems such as electric storage may need offsetting measures, such as solar panels, to meet the BASIX targets (YourHome).

THE RULES IN NSW

Temperature rules every installation must meet

Storage hot water must be heated to at least 60°C at least once every 7 days, to stop bacteria such as Legionella growing (YourHome).

Water at showers, baths, basins and bidets must be no hotter than 50°C. In NSW a tempering valve or another approved device is required on every new installation and every replacement, including a like-for-like swap (Building Commission NSW). That is why a proper replacement quote includes one, and why faulty tempering valves are among the most common hot water faults in our job records.

FROM OUR JOB RECORDS

What we see on Sydney hot water jobs

Since 2019 our licensed plumbers have completed 1,125 hot water jobs. The most common causes we recorded:

  • Water leak: 60 jobs
  • Faulty tempering valve: 54 jobs
  • Burst water pipe: 40 jobs
  • Faulty hot water element or thermostat: 22 jobs
  • Faulty pressure relief valve: 11 jobs

Half of our priced hot water jobs cost between $495 and $4,015, with a median of $1,980: repairs and replacements together, every type.

QUESTIONS

Questions about electric storage hot water

MORE TYPES

Other hot water systems

READ MORE

Hot water guides

SYDNEY’S 24/7 PLUMBER

Talk to us about your hot water

A licensed plumber will size the right system for your home and give you a fixed price before any work starts.

Licensed NSW 285594C

$0 call-out in business hours

Lifetime labour warranty

4.9 from 3,000+ reviews