Reverse Osmosis Water Filters

The most thorough filter for drinking water, explained honestly: what it removes, and the trade-offs.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(2,800+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 2,800+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

Reverse osmosis pushes water through a membrane so fine that most dissolved salts, metals, fluoride, nitrate and PFAS are held back. It is the most thorough drinking water filter you can fit at home. The trade-offs: Puretec says about 2 litres go to the drain for every litre you drink, it removes the minerals as well, and it needs cupboard space for a storage tank. A Puretec RO270 costs about $1,100 to $1,900 installed. Certified claims are made to NSF/ANSI 58.

HOW IT WORKS

Two pre-filters, a membrane and a tank

Cold water passes two pre-filters first. On the Puretec RO270 these are a 5 micron moulded carbon cartridge for sediment and a 0.5 micron carbon block for chlorine. Chlorine damages RO membranes, so these stages protect the membrane as well as the taste.

Mains pressure then pushes the water through the membrane. The pure water collects in a small storage tank under the sink, 7 litres on the RO270, and the rest carries what the membrane held back to the drain. When the tank is full, a shut-off valve stops the system, so nothing more runs to the drain.

The filtered water comes out of its own faucet. RO makes water slowly, which is why it fills a tank instead of running straight to the tap.

A Proximity plumber working under a kitchen sink with a customer

WHAT IT DOES AND DOESN’T

What it removes, honestly

Removes or reducesResultNotes
Dissolved salts and metalsYesPuretec says up to 98% of all dissolved impurities
FluorideYesThe one home filter that removes a meaningful amount
NitrateYesListed by Puretec for the RO270
PFASYesListed by Puretec for the RO270; certified claims are made to NSF/ANSI 58
Chlorine taste and smellYesRemoved by the carbon pre-filters before the membrane
Healthy mineralsRemoved tooMost of the minerals in a diet come from food; a remineralising stage adds some back for taste
Water useSome to drainAbout 2 litres to the drain for every litre made, Puretec says; it stops when the tank is full

Facts checked 9 November 2026. Sources: Sydney Water, NSW Health, Standards Australia and Puretec.

WHO IT SUITS

Is it right for you?

Fluoride

Families who would rather drink water without added fluoride.

PFAS

The strongest extra barrier, if you want one beyond Sydney Water’s treatment.

Taste

Very pure-tasting water for drinking, tea and coffee.

WATER USE

How much water reverse osmosis uses

Every reverse osmosis system makes two streams: pure product water, and reject water that carries the impurities away. Puretec’s RO270 guide puts the ratio at generally about one to two, so roughly 2 litres go to the drain for each litre you drink. Puretec adds that the reject water can be sent to the garden instead of the drain.

Two things keep it in proportion. Only your drinking tap is on RO, so it is the water you drink and cook with, not your showers or washing. And the RO270 has an automatic shut-off: once the 7 litre tank is full, production stops and nothing more runs to the drain.

Puretec rates the RO270 at up to 270 litres a day, far more than a family drinks. What you notice is the tank: after filling a big stockpot it takes a while to refill, and Puretec says a new system takes 3 to 4 hours to fill the tank the first time (Puretec RO270 user guide).

INSTALLATION

What your kitchen needs for reverse osmosis

  • Cupboard space for the filter bank and the storage tank, with at least 30 mm below the housings to change the cartridges
  • A drain connection: a clamp on the sink waste pipe, above the trap, takes the reject water
  • A hole for the faucet: the RO270 faucet needs a 12 mm hole in the benchtop or sink; drilling stone takes longer
  • Pressure of at least 300 kPa: below that the membrane struggles and a booster pump is needed; above 500 kPa a pressure limiting valve is required
  • Cold water only, between 0 and 30°C, out of sunlight and never outdoors
  • Water inside the membrane’s limits: Puretec lists up to 2,000 mg/L of dissolved solids and 171 mg/L of hardness; Sydney’s soft mains water sits well inside both

These figures come from Puretec’s RO270 user guide and product page. Where the pressure is low, Puretec makes a pumped version, the CO-RO270P, which needs a power point under the sink.

THE FIRST DAYS

Starting up, and living with RO

  1. On the day, the system is flushed: Puretec says to fill and empty the tank twice before drinking, to clear the sterilising solution the membrane is stored in.
  2. Puretec also asks for the unit to run for 4 hours on first start-up before you use the water.
  3. In daily use, push the faucet handle down for a glass, or lift it for a continuous flow.
  4. After more than 2 days away, flush it for 10 minutes. After 2 weeks or more without use, Puretec says the cartridges may need replacing, and the membrane can be damaged if the unit sits unused for long.
  5. Change the two pre-filters every 6 months or 8,000 litres, whichever comes first, and the membrane every 18 to 24 months or when the water quality drops.

RO OR CARBON BLOCK?

Reverse osmosis or an under-sink carbon filter?

Reverse osmosisCarbon block under-sink
Chlorine taste and smellRemovedRemoved
FluorideMost removedLeft in
Dissolved salts, metals, nitrateMostly removedMostly left in; lead only if certified
PFASReduced; certified claims to NSF/ANSI 58Reduced when certified to NSF/ANSI 53
Calcium and magnesiumRemoved with everything elseLeft in
Water to the drainAbout 2 litres per litre madeNone
Cupboard spaceFilter bank plus a storage tankOne slim cartridge
Installed price$1,100 to $1,900$550 to $950
Yearly service$280 to $450$220 to $380

If you want better tasting water, carbon block does the job for less. Choose reverse osmosis if you want fluoride out, or the most thorough barrier you can fit against dissolved chemicals.

MYTH OR FACT

Reverse osmosis myths

MythFact
RO water is bad for you because it has no mineralsMost of the minerals in a diet come from food, not water. Some people find RO water tastes flat; a remineralising stage adds some back for taste.
RO wastes huge amounts of waterIt sends about 2 litres to the drain for each litre made, only for the drinking tap, and stops when the tank is full. The reject water can go to the garden.
Boiling does the same jobNo. Boiling kills germs but concentrates whatever is dissolved as the water evaporates, and NHMRC says boiling does not remove PFAS.
Sydney water needs RO to be safeNo. Sydney Water says its water meets the guidelines and needs no extra treatment for PFAS. RO is a choice for fluoride, taste or an extra barrier.

WHAT IT COSTS

Prices in Sydney

Typical Sydney prices, supplied and installed by a licensed plumber, including GST. You get a fixed price before any work starts.

SystemInstalled priceNotes
Reverse osmosis under sink$1,100 to $1,900Puretec RO270. Needs a drain connection and cabinet space.
Yearly service: reverse osmosis$280 to $450Both pre-filters; the membrane every 18 to 24 months.

WHAT WE INSTALL

The Puretec system we fit

We install the Puretec RO270 under-sink reverse osmosis system. Puretec says it reduces up to 98% of all dissolved impurities, and lists fluoride, PFAS, heavy metals, salts, nitrate, bacteria, viruses and cysts. Its product page cites no NSF/ANSI 58 certificate, so we treat those figures as Puretec’s own claim.

Puretec’s suggested retail price for the RO270 was $1,183.72 including GST on 9 November 2026, for the equipment alone. Warranty: 3 years, 1 year parts and labour then 2 years parts (Puretec warranty).

Puretec’s RO270 guide says to change the two pre-filters at least every 6 months or 8,000 litres, whichever comes first (8,000 litres is about 20 litres a day for a year), and the membrane every 18 to 24 months or when the water quality drops. A yearly service costs about $280 to $450, and we can book the 6-month pre-filter change in between.

QUESTIONS

Questions about reverse osmosis

MORE TYPES

Other water filters

READ MORE

Water filter guides

CLEAN WATER FOR YOUR FAMILY

Talk to us about your water

A licensed plumber will tell you honestly what your home needs, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Licensed NSW 285594C

Every enquiry answered in 15 minutes

Lifetime labour warranty

4.9 from 3,000+ reviews