Under-Sink Water Filters

The finest filtered water where you drink it: inline on your mixer, with a filter tap, or a 3-way mixer.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(2,800+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 2,800+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

An under-sink filter sits in the cupboard below your kitchen sink and filters the cold water you drink and cook with. It either connects inline to your existing mixer, so all the cold water from that tap is filtered, or feeds its own filter tap or a 3-way mixer. A carbon block cartridge removes the chlorine taste and smell. A Puretec system costs about $550 to $950 installed, or about $1,300 with a 3-way mixer tap. Puretec says to change the PureMix Z7 cartridge every 6 months or 60,500 litres, whichever comes first.

HOW IT WORKS

A carbon block filter in your kitchen cupboard

Cold water is taken from the pipe under your sink, passed through a carbon block cartridge and sent up to the tap. Carbon block is compressed carbon: finer and more thorough than loose granules, because water cannot find a path around it.

Puretec’s PureMix Z7 connects inline to your existing 2-way mixer, so the cold side of the tap you already have runs filtered, with no new hole in the bench. Its Z1 kits instead feed a separate filter faucet, or a Tripla 3-way mixer that gives hot, cold and filtered water from one spout.

Hot water never goes through the filter: these systems are made for the cold line only, and hot water is not for drinking.

A glass being filled with water at a kitchen tap

WHAT IT DOES AND DOESN’T

What it removes, honestly

Removes or reducesResultNotes
Chlorine taste and smellYesThe main reason families choose one
Fine sedimentYesPuretec lists about 1 micron (nominal) for the Z7 and 0.1 micron for the Z1
Giardia and Cryptosporidium cystsPuretec says yesPuretec says the Z1 reduces 99.9%; NSW Health says cysts need an absolute 1 micron or finer filter
PFASPuretec says yesPuretec says the Z7 works best for PFAS after a whole house filter; it cites no NSF/ANSI certificate
LeadIf certifiedChoose a filter certified to NSF/ANSI 53 for lead if you have old brass fittings
Bacteria such as E. coliNot reliablyPuretec says the Z7 may not suit E. coli concerns; tank water needs UV
FluorideNoOnly reverse osmosis removes a meaningful amount

Facts checked 9 November 2026. Sources: Sydney Water, NSW Health, Standards Australia and Puretec.

WHO IT SUITS

Is it right for you?

Taste

Better tasting water and ice, with no chlorine smell.

Renovations

Pair it with a new 3-way mixer and there is only one tap on the bench.

Older homes

An extra barrier at the drinking tap, with NSW Health’s advice to flush the cold tap.

THREE WAYS TO FIT IT

Inline, filter tap or 3-way mixer?

OptionHow it worksGood forWatch for
Inline on your mixerThe filter sits on the cold hose of your existing tap, so all cold water from it is filteredKeeping the tap you have, with no new hole in the benchWashing up and filling the sink use cartridge capacity too, so the litres run out sooner
Separate filter tapA small faucet beside your mixer, used only for drinking and cookingMaking each cartridge last; everyone knows which tap is for drinkingNeeds a hole through the benchtop or sink
3-way mixerOne mixer with hot, cold and a separate filtered channelRenovations, and a clean bench with one tapCosts more; best when the mixer is being replaced anyway

With the inline option, remember that warm water from the mixer is part cold, so it passes through the filter too. The cartridge is rated in litres, and every litre counts.

WILL IT FIT?

Checking your cupboard first

Most kitchen cupboards take an under-sink filter, but it pays to look before you choose. Here is what we check, from Puretec’s installation requirements for the PureMix Z series:

  • Room to twist the cartridge out: Puretec asks for at least 70 mm of clear space below the Z7 cartridge
  • A spot away from the bin and cleaning products; Puretec warns that a knock can unseat the cartridge
  • A 15 mm cold water connection and a pressure of 200 to 520 kPa; above 500 kPa a pressure limiting valve is needed, and Puretec supplies one with the Z7
  • Water no warmer than 38°C at the filter, and the unit out of direct sunlight
  • Space shared sensibly with a dishwasher, boiling water unit or waste disposal unit, with hoses that do not kink

Puretec also advises checking the filter regularly for leaks and, where a leak could damage the cabinet or floor, fitting a drain tray or a leak detector under it (Puretec Z7 user guide). A slow drip in a sink cupboard can go unnoticed for weeks; if you suspect one, see leak detection.

ON THE DAY

How the install goes

  1. We turn off the cold water to the sink and release the pressure at the tap.
  2. We mount the filter head on the cupboard wall, level and clear of the bin and pipes, with room below for the cartridge.
  3. For an inline filter we connect it between the cold isolation valve and your mixer’s hose. For a filter tap or 3-way mixer we drill the bench or sink and fit the new tap.
  4. We fit the pressure limiting valve, seat the cartridge until its arrows line up, turn the water on and check every joint for leaks.
  5. We run the filter for at least 10 minutes to clear fine carbon dust, as Puretec’s guide asks. Milky water in the first glasses is tiny air bubbles and clears on its own.
  6. We show you how to change the cartridge and write the date on it.

MYTH OR FACT

Under-sink filter myths

MythFact
A jug filter does the same jobMost jugs use loose carbon and hold a litre or two, with small cartridges changed often. An under-sink carbon block filters more water, more finely, straight from the tap. A jug is still a good start for renters.
Water from the hot side is filtered tooNo. The filter is on the cold line only. Water from the hot side has not been through it.
A cartridge lasts until the water stops flowingCarbon keeps letting water through long after it has stopped removing chlorine. Puretec sets the Z7 at 6 months or 60,500 litres, whichever comes first.
It strips out the mineralsNo. Carbon block leaves calcium, magnesium and fluoride in. Reverse osmosis is the type that removes them.

WHAT IT COSTS

Prices in Sydney

Typical Sydney prices, supplied and installed by a licensed plumber, including GST. You get a fixed price before any work starts.

SystemInstalled priceNotes
Under-sink filter with its own filter tap$550 to $950Puretec PureMix Z7 inline on your mixer, or a Z1 with a filter tap. About $1,300 with a 3-way mixer tap.
Yearly service: under-sink$220 to $380New cartridges and a check, parts and labour.

WHAT WE INSTALL

The Puretec system we fit

We install the Puretec PureMix Z7, which connects inline to your existing mixer, and the Z1 Quick Twist kits with a dedicated filter faucet or a Puretec Tripla 3-way mixer. Quick Twist cartridges change by hand with a quarter turn.

Warranty: 10 years on the PureMix Z7 and the Z1 kits, and 6 years on the Z1 Tripla (in each case 1 year parts and labour, then parts only), used with Puretec cartridges (Puretec warranty). Puretec lists both systems under WaterMark licence WM 74617 to AS 3497.

Puretec’s Z7 user guide says to change the cartridge every 60,500 litres or 6 months, whichever comes first, or sooner if the taste, smell or flow changes (Puretec Z7 user guide). On 9 November 2026 Puretec listed the Z7-R replacement cartridge at $205.28 including GST (Puretec Z7-R), so on that schedule two cartridges a year cost about $410 if you twist them in yourself. A plumber’s yearly service costs about $220 to $380. After a break of more than 2 days, such as a holiday, Puretec says to run the filter for 10 minutes before drinking from it.

QUESTIONS

Questions about under-sink filters

MORE TYPES

Other water filters

READ MORE

Water filter guides

CLEAN WATER FOR YOUR FAMILY

Talk to us about your water

A licensed plumber will tell you honestly what your home needs, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Licensed NSW 285594C

Every enquiry answered in 15 minutes

Lifetime labour warranty

4.9 from 3,000+ reviews