Rainwater Tank Filters

Filtration and UV for tank water you use in the house, sized to your pump.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(2,800+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 2,800+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

Rainwater is not treated: it picks up leaves, dust, sediment and droppings from the roof and gutters, and NSW Health recommends that people in urban areas use the public supply for drinking and cooking. If you use tank water in the house, it needs sediment and carbon filters followed by a UV steriliser sized to your pump, plus clean gutters, an emptied first-flush device and a clean tank. A Puretec Hybrid rainwater system costs about $2,200 to $3,800 installed.

HOW IT WORKS

From roof to tap

Gutter guards and a first-flush device keep the worst of the roof runoff out of the tank. The pump then sends water through a sediment filter, a carbon filter and a UV steriliser before it reaches your taps.

Every part is sized to your pump’s flow, because water that rushes past a UV lamp too fast does not get the dose it needs.

The system needs a power point for the UV lamp, beside the pump.

A Proximity plumber talking with a customer in her kitchen

WHAT IT DOES AND DOESN’T

What it removes, honestly

Removes or reducesResultNotes
Leaves, grit and sedimentYesGutter guards, the first-flush device and the sediment filter
Taste, colour and smellYesThe carbon stage
Bacteria, viruses and cystsYesThe UV stage; Puretec says its Hybrid R10 kills up to 99.99% of E. coli, Giardia and Cryptosporidium
Chemicals from the roofPartlyCarbon reduces some; NSW Health says to replace or cover lead flashings
A dirty tank or guttersNoNo filter replaces cleaning the gutters, the first-flush device and the tank

Facts checked 9 November 2026. Sources: Sydney Water, NSW Health, Standards Australia and Puretec.

WHO IT SUITS

Is it right for you?

Tank homes

Homes that use tank water in the kitchen, bathrooms or laundry.

Holiday houses

Water that sits in the tank and pipes between visits.

Backup supply

Tank water switched into the house during water restrictions.

FROM THE ROOF DOWN

What gets into your tank

Most problems with tank water start on the roof. Leaves rot in the gutters, birds and possums leave droppings, and dust settles between rains. The first water off the roof carries most of it, which is why a first-flush device diverts that first flush away from the tank.

NSW Health also advises replacing or covering any lead flashings or lead roofing screw washers, using lead-free materials for building or plumbing work, and choosing a tank made for rainwater, ideally tested to AS/NZS 4020. Opaque tanks help stop algae growing inside.

Filters and UV treat what has already reached the tank. They cannot make up for a roof, gutters or a tank that are not looked after.

LOOKING AFTER IT

A maintenance calendar for tank water

WhenWhat to doSource
After every rainfallEmpty the first-flush device so it can catch the next flushNSW Health
Each morning you drink itRun the rainwater tap for 10 seconds; for at least 2 minutes if it has not been used for more than 48 hoursNSW Health
Every 3 to 4 monthsClear leaves and debris from the gutters and roofNSW Health
About every 3 monthsCheck the UV quartz sleeve and clean it if a film has formedPuretec
Every 6 to 12 monthsInspect the tank for sludge, and change the filter cartridgesNSW Health; Puretec
At least once a yearCheck the screens are sealed and undamaged, and change the UV lampNSW Health; Puretec

Sludge can be siphoned out, the tank emptied, or a professional tank cleaner brought in (NSW Health rainwater advice).

CONNECTING A TANK

Plumbing a tank into the house: the rules

  • Tank water used inside must stay separate from the mains supply, with the right backflow protection. Sydney Water rates above-ground rainwater tanks as a low hazard, and homes with a 20 mm or 25 mm meter need no extra backflow device for them. Below-ground tanks need a vented dual check valve with an atmospheric port.
  • Sydney Water advises a fail-safe top-up connection or an automatic switching device, so the house switches to mains water when the tank runs dry.
  • Where the tank supplies a toilet, washing machine or hot water system, or is topped up by or switched to mains water, Sydney Water says your plumber must book and pay for an inspection.
  • Ask your plumber for your Certificate of Compliance when the work is done.
  • Check with your council whether the tank itself needs approval.

Sources: Sydney Water on rainwater tanks and backflow prevention. See also our pages on backflow prevention and rainwater tank plumbing. Half of our 31 priced rainwater tank jobs since 2019 cost between $385 and $2,151, including GST, with a median of $660. The most common causes recorded on those jobs were a water leak and a burst water pipe.

MYTH OR FACT

Rainwater myths

MythFact
Rainwater is pure because it falls from the skyIt picks up whatever is on the roof and in the gutters on the way down. NSW Health recommends mains water for drinking and cooking in urban areas.
A filter alone makes tank water safeFilters take out sediment and improve taste, but few remove all germs. NSW Health says filtering is best used before UV or chlorine.
Boiling makes no differenceNSW Health lists bringing rainwater to a rolling boil and letting it cool as a way to treat it for drinking. It does not remove chemicals.
Once the system is in, the tank looks after itselfGutters, the first-flush device, screens, sludge, cartridges and the UV lamp all need regular attention.

WHAT IT COSTS

Prices in Sydney

Typical Sydney prices, supplied and installed by a licensed plumber, including GST. You get a fixed price before any work starts.

SystemInstalled priceNotes
Rainwater tank filter with UV$2,200 to $3,800A Puretec Hybrid rainwater system, sized to your pump.
Yearly service: whole house twin$300 to $550Both cartridges, housings cleaned, O-rings checked.

WHAT WE INSTALL

The Puretec system we fit

We install Puretec Hybrid rainwater systems, which combine sediment and carbon filters with UV in one unit and alarm when the lamp is due. Puretec offers a UV transmittance test if you are unsure whether your tank water is clear enough for UV.

Warranty: Puretec lists 3 years for its Hybrid systems and 1 year, pro rata, on UV lamps (Puretec warranty). We confirm the exact term for your model with the quote.

Change the filter cartridges every 6 to 12 months and the UV lamp every year. Follow NSW Health’s calendar above for the gutters, the first-flush device, the screens and the tank itself.

QUESTIONS

Questions about rainwater tank filters

MORE TYPES

Other water filters

READ MORE

Water filter guides

CLEAN WATER FOR YOUR FAMILY

Talk to us about your water

A licensed plumber will tell you honestly what your home needs, and give you a fixed price before any work starts. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Licensed NSW 285594C

Every enquiry answered in 15 minutes

Lifetime labour warranty

4.9 from 3,000+ reviews