Tile and Slate Roof Repairs

Ridges, cracked tiles and slates, valleys and flashings, done properly.

$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

Google

Overall Rating

4.9

Five stars

(3,000+)

Brightest & Best Business Awards: Winner 2019, Winner 2024, Winner 2025, People's Choice 2025, Finalist 2023

NOW SERVICING NORTH SYDNEY

  • 35+ Years of Combined Experience
  • Yes, a Real Plumber Reads These Messages Too
  • The Kettle Is Always On at Head Office
  • $0 Call Out Fees
  • Every Job Photographed, Every Price Upfront
  • We Answer the Phone. Revolutionary, We Know.
  • Trusted by 15,000+ Sydney Families
  • No Call Centres. You Get a Human in Sydney
  • Your Neighbours Probably Have Our Fridge Magnet
  • Onsite in 30 Minutes Guaranteed
  • Boots Off at the Door. Every Single Time.
  • 3,000+ Google Reviews and Counting
  • In the community For the community

THE SHORT ANSWER

In short

Tiled and slate roofs last well when the small things are kept up: ridge pointing, cracked tiles and slates, and clear valleys. We repair and replace tile and slate roofs, re-point and re-bed ridge caps, replace flashings and valleys, and convert tiled roofs to metal when repairs no longer make sense. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Licensed & Insured (NSW 285594C)

24/7 Emergency

$0 Call-Out in Business Hours

Upfront Fixed Pricing

Lifetime Labour Warranty

Family Owned

CLAY, CONCRETE OR SLATE

Terracotta, concrete and slate: how each one ages

Terracotta (clay) tilesConcrete tilesNatural slate
Made fromFired clay, with the colour fired in, glazed or unglazedSand, cement and pigment, with a surface colour coatSplit natural stone; slate on historic Australian buildings came from quarries in Wales and England
How it agesHolds its colour. Early unglazed or underfired tiles can be porous enough to decay from salt attack, like sandstoneThe surface coat fades, and a whitish film of natural salts can appearVery durable, but slates can delaminate, splitting into layers, as they weather
Usual failureCracked or decaying tiles, and cracked mortar on the ridgeTiles cracked by foot traffic, worn pointing, faded surfaceSlipped slates when the nails holding them rust through
Tell-tale signRed dust lying on top of the ceilingLoose mortar or pieces of tile in the gutterSlates in the gutter, or thin streaks running down the slates
The repairA matched or salvaged tile; ridges re-pointedA matched tile; ridges re-pointed; a coating only if you want the look refreshedSlate for slate, the same size and thickness, fixed with non-ferrous nails

WHAT WE CHECK

What we look for on a tile or slate roof

  • Ridge and hip caps: cracked or missing pointing, caps that move, broken caps
  • Tiles or slates standing up out of the line of the roof, called cocking, which can point to a batten or framing problem underneath
  • Slates that sound dull when tapped instead of ringing clearly: a sign they are delaminating
  • Slates in the gutter and streaks down the roof, which usually mean rusted nails
  • Valleys and flashings: rust, lifted edges, debris, and joints that have opened
  • From the roof space: daylight through the roof, damp or torn sarking, and red dust on the ceiling under terracotta

The NSW Heritage Office uses the same checklist for heritage roofs (information sheet 4.2). You get photos of anything we find, so you can see it without going up there.

BEDDING AND POINTING

Re-bedding or re-pointing: what’s the difference?

The ridge caps along the top of a tiled roof sit on bedding, a mortar that holds them in place. Pointing is the top layer that seals the joints. Weather cracks the pointing first; when the bedding goes too, the caps loosen and water gets in (Monier).

Re-pointing seals the joints with a modern flexible compound that moves with the roof. Re-bedding lifts the caps and sets them in new bedding before pointing. We tell you which your roof needs, with photos.

RIDGE CAPPING

How ridge capping is re-pointed and re-bedded

Ridge work is the most common repair on a tiled roof. On a slate roof, ridges were traditionally capped in lead, galvanised iron, copper or terracotta, and the NSW Heritage Office advises reinstating the original material where it is known (NSW Heritage Office).

1

Check every cap

Each ridge and hip cap is checked for movement, cracked pointing and breaks, and photographed.

2

Remove what has failed

Cracked and loose pointing is raked out. Where the bedding has failed as well, the caps are lifted, cleaned and set aside.

3

Re-bed where needed

Lifted caps are set back in fresh bedding, true to the line of the ridge.

4

Point with a flexible compound

A flexible pointing compound seals the joints and moves with the roof, where old mortar pointing cracks as the roof moves.

5

Fix every cap

The building code expects each ridge, hip and capping tile to be fixed, with nails, screws, clips or flexible pointing that meets AS 2050 (NCC 2022 Part 7.3).

6

Clean up and show you

Old mortar is cleared off the roof and out of the gutters, and you see photos of the finished ridge.

FLASHINGS AND VALLEYS

Flashings and valleys on tile and slate roofs

Tiles and slates shed water; the metal around them carries it. Valleys collect the water from two roof planes at once, and flashings seal the joins where the roof meets a wall, a chimney or a pipe. When a valley rusts, fills with leaves or has its edges lifted, the water it carries in a storm has nowhere to go but inside.

The building code sets the basics for flashings on tiled roofs: wall and step flashings at least 150 mm wide with an upturn of at least 75 mm, joints lapped at least 75 mm in the direction the water runs, fixings that suit the flashing metal, and no lead flashings on a roof that drains to drinking water (NCC 2022 Part 7.3).

On slate and older tiled roofs, the NSW Heritage Office notes that lead was the traditional flashing, that copper is the preferred material for valleys on heritage roofs, and that copper and galvanised steel should not be used together, especially with copper above (NSW Heritage Office). If your roof fills a rainwater tank you drink from, tell us: it rules out lead.

LOOKING AFTER A TILED ROOF

What keeps a tiled roof watertight

  • Have it inspected by a professional about every five years, and stay off it yourself: walking on tiles cracks them (Monier)
  • Clear gutters and valleys at least once a year, more often under trees, and trim overhanging branches
  • Don’t pressure-wash tiles: the pressure can damage them
  • Painting concrete tiles refreshes their look but does not make them more waterproof; terracotta never needs painting
  • A whitish film on concrete tiles is natural salts coming out of the tile, not damage

Valleys and flashings on a tiled roof are metal, and their repair is roof plumbing. They are one of the most common sources of leaks we find.

WALKING ON ROOFS

Why we ask you to stay off a tile or slate roof

Falls from height are the number one cause of death on NSW construction sites, and SafeWork NSW notes that the most serious and fatal falls, from roofs, ladders and scaffolds, include falls from under 4 metres (SafeWork NSW). The eave of a single-storey house is well inside that.

Tile and slate roofs add their own risks. Tiles crack under a misplaced foot, slates are brittle and slippery, moss and lichen make both worse when wet, and a crack you can’t see becomes a leak in the next storm. The NSW Heritage Office’s advice is that only trained people should go out over a brittle roof surface (NSW Heritage Office).

For roof work, SafeWork NSW treats guardrails at the roof edge as the best protection, with the top rail at least 900 mm above the roof surface, and harness systems only where a risk assessment finds edge protection is not reasonably practicable. Skylights and fragile sheeting need covers or barriers (SafeWork NSW).

What that means for you

  • Check gutters and the roof from the ground, a window or a ladder on firm, level ground, never from the roof itself
  • Don’t climb up to fetch a ball or to look for a leak in the rain; call us instead
  • If someone needs to go up, ask how they will protect the edge and where they will walk
  • Ask for photos: you can see every cracked tile and flashing without climbing up

WHAT IT COSTS

What tile and slate repairs cost

Our job records don’t separate tile and slate repairs from other roof work, so we don’t publish a separate figure for them. Across all 394 priced roof plumbing jobs since 2019, half cost between $663 and $3,057, including GST, with a median of $1,600.

On a tiled or slate roof the price moves with how many tiles or slates need replacing and how easily they can be matched, the length of ridge to re-point or re-bed, whether valleys or flashings need replacing, the height and pitch of the roof and the edge protection it needs, and, on a heritage home, matching the original materials. We inspect, show you photos and give you a fixed price before any work starts.

SLATE AND HERITAGE ROOFS

Slate and heritage roofs

Slate roofs on older terraces and Federation homes are repaired slate for slate: replacing cracked or slipped slates, and the flashings and valleys around them.

Many of these homes are heritage items or in heritage conservation areas, such as much of Paddington and Woollahra, where changing the roof material or colour needs council approval. We check before we quote, and keep repairs in keeping with the roof.

FULL RE-ROOFS

Full tile and slate re-roofs

We also replace whole tile and slate roofs. Depending on the size of the job and our schedule, the work is done by our own team or by a licensed roofing partner we manage. Over $5,000, tiling and slating work in NSW needs a contractor licence with the roof tiling or roof slating class (NSW Government): your written contract names who does the work and their licence. Over $20,000, the work is covered by Home Building Compensation insurance, and you get the certificate before any payment is asked for (NSW Government).

TILE TO METAL

When to move from tiles to metal

If a tiled roof needs many new tiles, full re-bedding and new valleys at once, a new metal roof can be the better long-term answer: lighter, with fewer joins to leak. Outside heritage areas, see roof replacement for how it works and what it costs.

ASBESTOS ROOFS

Older fibro and corrugated cement roofs

Roofs and eaves on homes built before 1987 may contain asbestos. Never pressure-wash or walk on an asbestos cement roof: it is brittle, and cleaning it can spread fibres across the street (SafeWork NSW).

Removing more than 10 square metres of bonded asbestos needs a licensed removalist, and friable asbestos needs a Class A licence for any amount (asbestos.nsw.gov.au). If your roof may contain asbestos, we arrange testing and licensed removal before any other work.

CASE STUDIES

Roof jobs we have done

REVIEWS BY PROBLEM

What your neighbours say

Real reviews from our customers across Sydney, in their own words. Read every review, good and bad, on Google.

Repairs

Plumbing repair

“From scheduling an appointment to the actual repair, everything was seamless and efficient. Our plumber, Jack, was professional, knowledgeable and went above and beyond to ensure our issue was fixed to our satisfaction. The team provided us with a clear explanation of the problem and the solution, and we appreciated their honesty and transparency.”

Plumbing repair

“I was very impressed with the service I received from Proximity Plumbing. The technician was prompt, knowledgeable, and professional. He quickly diagnosed the issue and provided me with a clear explanation of the problem and the solution. The repair was completed efficiently and at a reasonable price.”

General plumbing

“I found Proximity Plumbing online and made contact. Immediately I was contacted and we discussed the job. I was passed onto the plumber that would be doing the work. Communication was excellent. The plumber arrive exactly on time and was professional and efficient.”

Hot water

Hot water installation

“Proximity Plumbing provided excellent customer service and professional workmanship when installing a new hot water system in my home. The team was prompt, friendly and took the time to explain the installation process and answer any questions I had. I was impressed with their attention to detail and cleanliness during the job, leaving my home just as they found it.”

Leaks

Leaking tap repair

“I recently used Proximity Plumbing for a leaky faucet repair and was extremely satisfied with their service. The technician arrived on time, was professional and knowledgeable, and fixed the issue quickly. The pricing was fair and transparent, and I appreciated the follow-up call to make sure everything was working properly.”

Renovations

Bathroom renovation

“I had a wonderful experience working with Proximity Plumbing for my bathroom renovation. They were professional, knowledgeable and efficient. The team was great to work with and provided excellent advice and recommendations. The final result was exactly what I wanted, a beautiful and functional bathroom that I love spending time in.”

AT A GLANCE

Key facts

Service

Tile and slate roof repairs

Licence

NSW 285594C, Roof Plumber class

Since

2015

Contracts

Written contract over $5,000; HBC insurance over $20,000

Labour

Lifetime labour warranty

Call-out

$0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.

Area

Eastern Suburbs, Inner East and Lower North Shore

QUESTIONS

Tile and slate roof questions

EXPLORE

Roof repairs, upgrades and replacement

SYDNEY ROOF PLUMBERS

Talk to a licensed roof plumber

We find the cause, show you photos and give you a fixed price before any work starts.

Licensed roof plumber, NSW 285594C

$0 call-out in business hours

Lifetime labour warranty

4.9 from 3,000+ reviews