“From scheduling an appointment to the actual repair, everything was seamless and efficient. Our plumber, Jack, was professional, knowledgeable and went above and beyond to ensure our issue was fixed to our satisfaction. The team provided us with a clear explanation of the problem and the solution, and we appreciated their honesty and transparency.”

Gutters, Downpipes and Box Gutters
Repairs, replacement and upgrades that keep storm water outside your home.
$0 CALLOUT FEE IN BUSINESS HOURS | FREE QUOTES | SAME DAY SERVICE

NOW SERVICING NORTH SYDNEY
WE ARE AVAILABLE
- 35+ Years of Combined Experience
- Yes, a Real Plumber Reads These Messages Too
- The Kettle Is Always On at Head Office
- $0 Call Out Fees
- Every Job Photographed, Every Price Upfront
- We Answer the Phone. Revolutionary, We Know.
- Trusted by 15,000+ Sydney Families
- No Call Centres. You Get a Human in Sydney
- Your Neighbours Probably Have Our Fridge Magnet
- Onsite in 30 Minutes Guaranteed
- Boots Off at the Door. Every Single Time.
- 3,000+ Google Reviews and Counting
- In the community For the community
THE SHORT ANSWER
In short
Gutters and downpipes have one job: carry storm water off the roof and, when they cannot keep up, overflow outside the house, never inside. We repair and replace eaves gutters, downpipes and box gutters in COLORBOND and ZINCALUME, add overflow and downpipes where they are missing, and fit metal gutter guards. $0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
THE RULES
What the building code asks of your gutters
| Rule | What it means for you |
|---|---|
| Overflow sized for a 1-in-100-year storm | In the heaviest rain, water must spill outside the house, not back into the eaves or walls |
| No more than 12 m of gutter per downpipe | Long gutters with one downpipe overflow; adding downpipes is often the fix |
| A fall of at least 1:500 | Gutters must slope to the downpipe so water does not sit and rust them |
| Brackets no more than 1.2 m apart | Sagging gutters hold water and pull away from the fascia |
| No lead on a drinking-water roof | Lead flashings and washers must not drain into a rainwater tank you drink from |
| Box gutters designed to AS/NZS 3500.3 | Box gutters fall outside the simple housing rules and need a designed sump, rainhead and overflow |
From the NCC 2022 (clause H2D6) and the ABCB Housing Provisions Part 7.4, which apply in NSW until NCC 2025 starts on 1 May 2027 (NSW Government).
HOW GUTTERS ARE SIZED
How big should gutters and downpipes be?
Gutters are sized for how hard rain falls in a short burst, measured in millimetres an hour over 5 minutes. The building code gives two figures for each place: the design storm the gutter must carry, with a 5 percent chance of happening in any year, and the bigger storm the overflow must handle, with a 1 percent chance.
| Location | Gutter design storm | Overflow design storm |
|---|---|---|
| Sydney | 201 mm an hour | 262 mm an hour |
| Avalon | 210 mm an hour | 287 mm an hour |
| Penrith | 178 mm an hour | 240 mm an hour |
| Campbelltown | 166 mm an hour | 223 mm an hour |
- The code lists minimum cross-sections for standard eaves gutters, from 5,200 to 9,000 square millimetres; anything bigger is designed to AS/NZS 3500.3.
- A 75 mm round downpipe suits the smaller gutter types but not the largest. 90 mm round, 100 x 50 mm and 100 x 75 mm rectangular downpipes suit them all.
- Each downpipe serves no more than 12 m of gutter, and sits as close as possible to any valley gutter, where water from two roof planes arrives at once.
- The bigger the roof area draining to each downpipe, the bigger the gutter must be, which is why adding a downpipe is often simpler than fitting a bigger gutter.
ABCB Housing Provisions Part 7.4, Tables 7.4.3a to 7.4.3d and clause 7.4.5.
OVERFLOW
Overflow: making sure it spills outside
Every gutter overflows in a big enough storm. The code’s aim is that when it does, the water goes out the front, away from the house, not back over the fascia into the eaves, walls and ceiling. These are the overflow measures it accepts:
| Overflow measure | How it works | Capacity in the code |
|---|---|---|
| Front face slots | Slots along the gutter front, at least 25 mm below the top of the fascia | 0.5 litres a second per metre |
| Controlled back gap | Spacers hold the gutter at least 10 mm off the fascia, so overflow drops behind it, clear of the house | 1.5 litres a second per metre |
| Lower front bead | The front lip of the gutter sits at least 10 mm below the top of the fascia | 1.5 litres a second per metre |
| Front face weir | A wide notch in the gutter front near the downpipe | 1.0 litre a second |
| Inverted nozzle | A spare outlet near the gutter’s high point that drops overflow clear | 1.2 litres a second |
| Rainhead | A box at the top of the downpipe with an overflow hole in its outer face | 3.5 litres a second |
A check you can do from the ground: look along your gutters. If the front lip sits level with or above the top of the fascia board behind it, and there is no other overflow, a downpour can push water back toward the house.
ABCB Housing Provisions Part 7.4, clauses 7.4.6 and 7.4.7.
WHAT YOU NOTICE
Gutter problems: sign, cause and fix
| What you notice | Likely cause | The fix |
|---|---|---|
| Water pours over the front in heavy rain | Too few downpipes, a blocked outlet, or a gutter too small for the roof | Clear the outlet; add a downpipe or a bigger gutter |
| Water runs down the fascia or walls | The gutter front is higher than the back, or joints leak | Reset the gutter with a lower front or a back gap; reseal or replace joints |
| Water sits in the gutter after rain | Not enough fall, or brackets too far apart so it sags | Re-hang it at a fall of at least 1:500 with brackets no more than 1.2 m apart |
| Rust spots or holes at joints | Standing water, salt, or the wrong metal under the roof | Replace the section in the right steel for your site |
| A downpipe overflows at the top or gurgles | A blocked downpipe or stormwater pipe below ground | Clear it; see blocked downpipe |
| Stains on the ceiling near a corner | A blocked valley or box gutter overflowing inward | Clear and repair it; see roof leak repairs |
| Grass or seedlings growing in the gutter | Leaves and silt left to build up | Clean it, and consider gutter guards |
BOX GUTTERS
Box gutters on terraces and flats
A box gutter sits inside the roof line, between two roofs or behind a parapet, so when it overflows the water goes straight into the building. They are common on Eastern Suburbs terraces and blocks of flats.
Most box gutter leaks come from a blocked outlet, a sump that is too small, rusted joins, or no overflow at all. The lasting fix is a box gutter rebuilt to AS/NZS 3500.3, with a sump or rainhead and an overflow that spills where you can see it.
Box gutters on apartment buildings, shops and offices are covered in more depth on box gutters and roof plumbing for buildings, and why strata box gutters flood explains the usual failures.
BEFORE AND AFTER
See the difference
Gutters that hold water again. Drag the handle to compare.
WHERE DOWNPIPES GO
Downpipes must not run into the sewer
Roof water belongs in the stormwater system, never in the sewer. When it rains, stormwater getting into Sydney Water’s wastewater pipes can overload them, and wastewater can then overflow into waterways and onto private properties, including inside homes. Sydney Water lists downpipes wrongly connected to private wastewater pipes as one of the common ways this happens, and checks properties with visual inspections and smoke testing (Sydney Water).
If a downpipe on your home runs into the ground beside a sewer gully, or your gully overflows in heavy rain, have it checked. We trace where each downpipe goes and reconnect it to stormwater where it is wrong. If the stormwater pipe underground is blocked, see blocked stormwater drains.
METALS THAT DON’T MIX
Why some gutters rust so fast
- Copper, brass, lead and 300-series stainless steel must not touch COLORBOND or ZINCALUME, and water running off copper must not drain onto them (BlueScope). A copper hot water pipe dripping onto a steel roof is a common cause of early rust.
- Rain off a COLORBOND, ZINCALUME or aluminium roof is so pure it attacks galvanised gutters, called inert catchment. BlueScope no longer recommends galvanised gutters and downpipes: we fit COLORBOND or ZINCALUME instead (Fielders, a BlueScope business).
- Offcuts, screws and rivet stems left on a roof rust and stain it. We sweep the roof at the end of every day.
NEAR THE SEA
Which steel to use near the beach
Salt spray decides which steel lasts. BlueScope measures from the high water mark to the nearest breaking surf (BlueScope):
| Distance from breaking surf | Roofing BlueScope recommends |
|---|---|
| More than 200 m | COLORBOND steel, or ZINCALUME steel |
| 100 m to 200 m | COLORBOND Ultra steel |
| Under 100 m | SUPERDURA stainless steel |
Many homes in Bondi, Tamarama, Bronte, Clovelly, Coogee and Maroubra sit within 200 m of the surf. Harbourside streets in Rose Bay, Double Bay and Vaucluse count as calm marine, where the rules are gentler. We measure your property before we recommend a steel.
Wash the areas rain does not reach, such as under the eaves and the underside of gutters, at least every six months, and more often near the coast (COLORBOND).
UPGRADES
Gutter guards, bigger gutters and rainwater tanks
- Gutter guards keep leaves out where trees overhang. In bushfire-prone areas, NSW advises metal guards (NSW Government).
- Bigger gutters and more downpipes are the code’s own fix for gutters that overflow in a downpour.
- Rainwater tanks: fit a first flush diverter on the downpipe, fine mesh on inlets and overflows, and keep lead off the catchment. In Sydney, NSW Health advises using mains water for drinking and cooking (NSW Health).
- Cleaning: clear gutters before storm season and more often under trees. Blocked gutters push water under the eaves into the roof (NSW SES).
LOOKING AFTER THEM
Looking after gutters and downpipes
- Clear gutters, downpipes and drains regularly so leaves don’t build up: blockages trap water that can overflow under the eaves into the roof cavity (NSW SES).
- Trim branches that hang over the roof; they fill the gutters with leaves and can fall in a storm.
- Don’t hose leaves down the downpipe: they collect in the stormwater pipe underground, where they are harder to clear.
- Check from the ground after heavy rain: water spilling over the front, stains on the fascia or water sitting in the gutter are early warnings.
- Wash the undersides of gutters and the areas rain doesn’t reach, more often near the coast, to slow corrosion.
- Use a ladder only on firm, level ground with someone holding it, and never climb onto the roof itself. If the roof is fragile or may be fibro, leave it to us.
WHAT IT COSTS
What gutter and downpipe work costs
Half of our 394 priced roof plumbing jobs since 2019 cost between $663 and $3,057, including GST, with a median of $1,600. That covers gutter and downpipe work and roof leak repairs together.
What moves the price: the length of gutter and the number of downpipes, the profile and steel (COLORBOND Ultra or stainless steel near the surf costs more), one storey or two, access and edge protection, new brackets or fascia repairs, adding overflow, and taking away the old gutters. Box gutters vary far more, because each one is designed for its roof: we price them after we measure.
Your price is fixed before work starts.
BEFORE YOU SAY YES
Questions to ask about new gutters
- What gutter profile and size, and is it right for the roof area draining to each downpipe?
- How many downpipes, where, and what size?
- What overflow will the new gutters have?
- Which steel, given my distance from the surf, and will it suit my roof metal?
- What fall will they be set at, and how far apart are the brackets?
- Where do the downpipes connect, and will you check they go to stormwater?
- Who takes the old gutters away?
Our records include 34 blocked downpipe jobs, most often in Vaucluse, and 34 rainwater tank jobs since 2019, so we look at the whole path of the water, from the roof to the drain, not just the gutter.
CASE STUDIES
Roof jobs we have done
REVIEWS BY PROBLEM
What your neighbours say
Real reviews from our customers across Sydney, in their own words. Read every review, good and bad, on Google.
Repairs
Hot water
Leaks
Renovations
AT A GLANCE
Key facts
Service
Gutters, downpipes and box gutters
Licence
NSW 285594C, Roof Plumber class
Since
2015
Contracts
Written contract over $5,000; HBC insurance over $20,000
Labour
Lifetime labour warranty
Call-out
$0 call-out Monday to Friday, 7:00am to 3:00pm, and Saturday, 7:00am to 12:00pm. Outside those times, and all day on NSW public holidays, the call-out fee is $385 ($350 plus GST), paid before we send a plumber.
Area
Eastern Suburbs, Inner East and Lower North Shore
QUESTIONS
Gutter and downpipe questions
EXPLORE
Roof repairs, upgrades and replacement

SYDNEY ROOF PLUMBERS
Talk to a licensed roof plumber
We find the cause, show you photos and give you a fixed price before any work starts.
Licensed roof plumber, NSW 285594C
$0 call-out in business hours
Lifetime labour warranty
4.9 from 3,000+ reviews





